A complete Guitar with Cud2D 1.5
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
A complete Guitar with Cud2D 1.5
Very nice a new version of Cut2D
Here files for you make you guitar with CUT2D 1.5
http://www.nbsdesign.com.br/temp/cut2d.rar
Good fan
Alex
Here files for you make you guitar with CUT2D 1.5
http://www.nbsdesign.com.br/temp/cut2d.rar
Good fan
Alex
Alex Navarro
Re: A complete Guitar with Cud2D 1.5
Thanks for your work. It should be fun, fun, fun.
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
I hope so!!GaryR6 wrote:Thanks for your work. It should be fun, fun, fun.
haha
Thanks!!
Alex Navarro
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
Model based on Stratocaster body and Ibanez neck.
Body with 5 mm minus of contour of the Stratocaster by Fender.
Cavity for 2 humbuker and 1 central single pickups.
Body thickness: 45mm
Tremulo cavity
Bolt on neck
25 inches of scale
12 inches of radius fingerboard
24 frets
Body with 5 mm minus of contour of the Stratocaster by Fender.
Cavity for 2 humbuker and 1 central single pickups.
Body thickness: 45mm
Tremulo cavity
Bolt on neck
25 inches of scale
12 inches of radius fingerboard
24 frets
Alex Navarro
-
- Vectric Apprentice
- Posts: 55
- Joined: Tue May 03, 2011 8:28 am
- Model of CNC Machine: home made
- Location: Barmouth UK
- Contact:
Re: A complete Guitar with Cud2D 1.5
Hi Alex I Know its cheecky but any chance of stl file for rear neck as tooling dosent show in Aspire as its different program
Art
Art
If all else fails read the instructions
- glenn
- Vectric Wizard
- Posts: 582
- Joined: Wed Jul 02, 2008 11:23 pm
- Model of CNC Machine: home brew 40x20
- Location: McArthur, Ohio U.S.A.
Re: A complete Guitar with Cud2D 1.5
Alex,
I have to try this---looks real good!
Thanks,
Glenn
I have to try this---looks real good!
Thanks,
Glenn
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
Hiangelkarla wrote:Hi Alex I Know its cheecky but any chance of stl file for rear neck as tooling dosent show in Aspire as its different program
Art
You Aspire must be the version 3.5.
Just the STL, ok... below STL and Cut3D
http://www.3dcncguitars.com/temp/12inchradius.rar
http://www.3dcncguitars.com/temp/NECKBACK.rar
Regards
Last edited by Alex Navarro on Tue Apr 03, 2012 2:16 am, edited 1 time in total.
Alex Navarro
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
glenn wrote:Alex,
I have to try this---looks real good!
Thanks,
Glenn
Alex Navarro
-
- Vectric Apprentice
- Posts: 55
- Joined: Tue May 03, 2011 8:28 am
- Model of CNC Machine: home made
- Location: Barmouth UK
- Contact:
Re: A complete Guitar with Cud2D 1.5
Alex Many thanks for the stl downloaded ok.
My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.
Art
My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.
Art
If all else fails read the instructions
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
Some like this?angelkarla wrote:Alex Many thanks for the stl downloaded ok.
My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.
Art
This is a video I did about a complete guitar on Aspire with English subtitles and more than 3 hours during. I got for others softwares too like a Rhinoc,eros, VCarve or Cut2d+Cut3d...
See in my web: www.3dcncguitars.com/guitars.htm - I´m make changes in my website and soon I´ll put more classic models there!
Have you some photos of you guitar?
Any question if I can help you, write me!
Best Regards
Alex
Alex Navarro
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
Les Paul Bod
In some days I will got a complete Les Paul and PRS models.
In some days I will got a complete Les Paul and PRS models.
Alex Navarro
- glenn
- Vectric Wizard
- Posts: 582
- Joined: Wed Jul 02, 2008 11:23 pm
- Model of CNC Machine: home brew 40x20
- Location: McArthur, Ohio U.S.A.
Re: A complete Guitar with Cud2D 1.5
Alex,
Wow! I can't wait to see it!
Glenn
Wow! I can't wait to see it!
Glenn
- Alex Navarro
- Vectric Craftsman
- Posts: 202
- Joined: Sat Jan 15, 2011 1:37 pm
- Model of CNC Machine: 3 axis
- Location: Spain
- Contact:
Re: A complete Guitar with Cud2D 1.5
The original Neck Stile
2 versions, plane and finish
2 versions, plane and finish
Alex Navarro