I thought I would try to figure out how to share some of my projects on here. We'll start with a King-size bed that I finished a few weeks ago. I have been trying to get some good pictures of it and this was the best I could do.
I wanted to spread the model out over the three panels, but it was way too deep to do that. So, I settled on a smaller carving in the center panel. I still had to reduce the Z in it to make it work and it lost a little detail, but it still doesn't look too bad. I have made the panels in the headboard so they can be removed later to change them.
I would also like to say that working with James on this was a pleasure. With the dealings I have had with some companies lately, it's nice to know that customer service still exists out there. Thank you James!
Tom
King-size bed
Moderator: Todd Bailey
-
- Posts: 13
- Joined: Wed Oct 19, 2011 1:35 am
- Model of CNC Machine: Shark Pro Plus
-
- Vectric Wizard
- Posts: 4797
- Joined: Thu May 18, 2006 3:24 pm
- Model of CNC Machine: ShopBot
- Location: North Carolina
Re: King-size bed
Great job Tom.
Looking forward to pictures of your other projects.
Tim
Looking forward to pictures of your other projects.
Tim
-
- Posts: 13
- Joined: Wed Oct 19, 2011 1:35 am
- Model of CNC Machine: Shark Pro Plus
Re: King-size bed
Thank you Tim, the pictures really don't do the bed justice. We don't have very good light in the bedroom right now. Once I get the nightstands and dresser done, I can put some more lights in there. I have totally redone most of this house, so now it's time to furnish it. I'm just happy to have the room done and the bed init right now.
Tom
Tom
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: King-size bed
Tom,
Really nice job! I like how the sky truly looks like the sky. The sky and waves are some the most difficult to reproduce (for me anyway). I can't wait to see more as well.
Thanks for sharing.
Really nice job! I like how the sky truly looks like the sky. The sky and waves are some the most difficult to reproduce (for me anyway). I can't wait to see more as well.
Thanks for sharing.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Re: King-size bed
Tom - very nice - I also like the bear on the other post too - would it be OK to post on our gallery? If so PM me with any name or info you would like as credit.
Cheers,
James
Cheers,
James
-
- Posts: 13
- Joined: Wed Oct 19, 2011 1:35 am
- Model of CNC Machine: Shark Pro Plus
Re: King-size bed
James, you're welcome to use any of my pictures in your gallery. I have several more projects using your models when I can get around to getting pictures posted. You can just use my name on them (Tom Day).
Tom
Tom