When I double-click on a .CRV file to open it and launch V-carve Wizard I get the error message:
Windows cannot find '{whatever file I clicked on}'. You may have typed the name incorrectly in the Run dialog, or another open program cannot find a system file. To search for a file, click the Start button, and then click Search.
This happens with any CRV file.
The files open fine from within Vcarve.
If Vcarve wizard is already running and I double-click on a .CRV file from Windows Explorer, nothing happens. No error message but the file is not opened.
The work-around is to just open CRV files from within Vcarve Wizard.
I'm running Windows ME 4.90.3000
Cannot double-click on .CRV file in Windows ME
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Cannot double-click on .CRV file in Windows ME
- Attachments
-
- VcarveError.jpg
- (25.39 KiB) Downloaded 110 times
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Thanks, that corrected the problem
Thanks, that corrected the problem
- dighsx
- Vectric Wizard
- Posts: 939
- Joined: Tue Nov 01, 2005 12:36 am
- Location: Royal Oak, Michigan USA
- Contact:
Glad I could help. It'll also work in Windows 2000. I don't know why I forgot to list it. Basically any windows OS above 3.1 (boy that was a while ago)
Take it easy.
Jay (www.cncjay.com)
Jay (www.cncjay.com)