Plate Easel - stand

An area to upload images of pieces cut using VCarve Pro
User avatar
esteeme1
Vectric Wizard
Posts: 2132
Joined: Tue Nov 02, 2010 3:26 pm
Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
Location: Chesapeake VA
Contact:

Re: Plate Easel - stand

Post by esteeme1 »

Hi Tim,

Very nice! I think I can use that for my plaques and Cutlass racks.

Thank
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/

User avatar
glenn
Vectric Wizard
Posts: 582
Joined: Wed Jul 02, 2008 11:23 pm
Model of CNC Machine: home brew 40x20
Location: McArthur, Ohio U.S.A.

Re: Plate Easel - stand

Post by glenn »

Hi Tim,
Wonderful stand, Thanks for sharing-
Looks like my wife will get a few chunks of pretty wood instead of coal in her stockings this Christmas! :D
You really give inspiration!
Glenn

jporter
Posts: 11
Joined: Fri Mar 27, 2009 10:03 pm

Re: Plate Easel - stand

Post by jporter »

Thanks a lot, Tim. This is very nice of you. I also saw and admired this little piece at Memphis. Really nice to meet you. joe

User avatar
GripUs
Vectric Wizard
Posts: 806
Joined: Thu Jan 18, 2007 2:07 pm
Location: San Angelo, Texas
Contact:

Re: Plate Easel - stand

Post by GripUs »

Tim,
Most kind of you to share! Perhaps I will have time in my retirement to make one of your inlaid plates and a stand for it!

Thanks again,

Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/

Bobtail Farm
Vectric Craftsman
Posts: 285
Joined: Mon Dec 01, 2014 3:53 pm
Model of CNC Machine: Homemade

Plate Easel - stand

Post by Bobtail Farm »

Tim,
Thanks for the design. The design scales well for variety of sizes. Tweaked it to suit my needs.
1/2" Solid surface material, 1/8" end mill, and 1/2" 60 degree v-bit.
Brian.
Attachments
small plate holder megamite.jpg

Jane Ndungu
Vectric Craftsman
Posts: 201
Joined: Fri Oct 31, 2014 8:14 am
Model of CNC Machine: TS1325

Re: Plate Easel - stand

Post by Jane Ndungu »

Beautiful Projects,thanks for the files.
Jane

Post Reply