IntelliCarve
IntelliCarve
How do I set the IntelliCarve post processor into the PhotoVCarve list.
-
Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: IntelliCarve
Hello dshaw340,
The default location for the post processors in the trial version of
PhotoVCarve is "C:\Program Files\PhotoVCarve Trial\PostP"
If you copy the post processor to this location, once you have restarted
the software, the new post processor should appear in the list.
I hope that this helps.
Cheers,
Mark.
The default location for the post processors in the trial version of
PhotoVCarve is "C:\Program Files\PhotoVCarve Trial\PostP"
If you copy the post processor to this location, once you have restarted
the software, the new post processor should appear in the list.
I hope that this helps.
Cheers,
Mark.
Re: IntelliCarve
Thank you. It is working now.