Merry Christmas - Free Designs
- Wemme
- Vectric Wizard
- Posts: 510
- Joined: Mon Jan 30, 2006 6:31 am
- Location: Christchurch, New Zealand
Ok this is kinda weird now.
I have found that if i start vcarve wizard and go file => open..... open.. all is well.
but if i double click on the file then all the material info is bung and it will crash if you change it.
I have attached some captures showing this issue on my mates speaker boxes we are making this weekend.
I have found that if i start vcarve wizard and go file => open..... open.. all is well.
but if i double click on the file then all the material info is bung and it will crash if you change it.
I have attached some captures showing this issue on my mates speaker boxes we are making this weekend.
- Attachments
-
- open.jpg
- (124.08 KiB) Downloaded 131 times
-
- d_click.jpg
- (123.34 KiB) Downloaded 110 times
- AngelicDiablo
- Vectric Craftsman
- Posts: 161
- Joined: Sun Oct 15, 2006 1:46 am
- Model of CNC Machine: Shopbot BT48 Standard
- Location: Houston, Texas
- Contact:
-
- Vectric Apprentice
- Posts: 99
- Joined: Sun Sep 24, 2006 7:35 pm
- Location: Lamesa Texas
- Paul_n
- Vectric Wizard
- Posts: 316
- Joined: Mon Aug 22, 2005 1:12 am
- Model of CNC Machine: ShopBot PR96
- Location: Cartersville, Georgia
Max...
Go to the link: http://vectric.com/vcarve-download/xmas ... ojects.htm
And download desired files from there...
Paul N
Go to the link: http://vectric.com/vcarve-download/xmas ... ojects.htm
And download desired files from there...
Paul N
I'm still playing with the trial version of VCarve PRO 3.0 and was attempting to cut the Xmas_decoration.crv. VCarve Pro doesn't think that this is a trial file and will not allow the toolpaths to be saved (see attached screen capture). Does this file need to be corrected or updated to allow for toolpath creation due to the newer 3.0 version of VCarve?
What a blast it is learning the VCarve PRO 3.0 interface, manipulating the demo files and saving up for the FULL version.
Thank you.
What a blast it is learning the VCarve PRO 3.0 interface, manipulating the demo files and saving up for the FULL version.
Thank you.
- Attachments
-
- Xmas_Wreath_Error.png
- (65.27 KiB) Downloaded 103 times
HayTay
Don't be the one that stands in the way of your own success!
Don't be the one that stands in the way of your own success!
Hi HayTay,
I've updated the file and you should now be able to save the toolpaths?
Free Christmas Designs
If you could let me know either way it would be appreciated.
Thanks,
Tony
I've updated the file and you should now be able to save the toolpaths?
Free Christmas Designs
If you could let me know either way it would be appreciated.
Thanks,
Tony
The VCarve PRO 3.0 trial version will now allow saving the Wreath toolpath(s). Thanks for the file fix and the quick response, Tony. I'll have to wait until later to carve the image since I've got to get ready for a date (with my wife ).Tony Mac wrote:Hi HayTay,
I've updated the file and you should now be able to save the toolpaths?
If you could let me know either way it would be appreciated.
Thanks,
Tony
Bang up job,
Thanks again.
HayTay
Don't be the one that stands in the way of your own success!
Don't be the one that stands in the way of your own success!