Rotary Tutorial
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Rotary Tutorial
I'm in the process of putting together a Rotary Machining Tutorial. This is a work in progress. I'll bump the thread whenever I make major additions. I hope to have it completed by March 2010.
Please PM me with corrections or suggestions.
The link to the tutorial is: http://humblesticks.com/cnc-rotary-tutorial.html
Please PM me with corrections or suggestions.
The link to the tutorial is: http://humblesticks.com/cnc-rotary-tutorial.html
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Rotary Tutorial
Magnifico tutorial GRACIAS
- Paul A
- Vectric Apprentice
- Posts: 89
- Joined: Mon Dec 12, 2005 11:59 pm
- Model of CNC Machine: Shopbot-Laser-Custom CNC & Indexer
- Location: Watford & Waterville
Re: Rotary Tutorial
Randall,
Many thanks for all the hard work, I am sure you have saved a lot of people (me included) many hours of trial and error.
Regards
Paul
Many thanks for all the hard work, I am sure you have saved a lot of people (me included) many hours of trial and error.
Regards
Paul
Paul
If you only have a hammer, everything looks like a nail.
http://www.fretworks.co.uk/
If you only have a hammer, everything looks like a nail.
http://www.fretworks.co.uk/
Re: Rotary Tutorial
Awesome! I would encourage Vectric to add this to their Technical Archive. Thank you so much for doing this.
Cobblewood Carver
-
- Vectric Wizard
- Posts: 1000
- Joined: Fri Sep 21, 2007 1:44 pm
- Model of CNC Machine: UCCNC Router, Plasma, Laser
- Location: Australia 3781
Re: Rotary Tutorial
This is excellent stuff Randall.
A great resource for those first delving into rotary work with Aspire.
Thanks for posting.
Greg
A great resource for those first delving into rotary work with Aspire.
Thanks for posting.
Greg
- larrybadgett
- Vectric Wizard
- Posts: 457
- Joined: Fri Oct 20, 2006 1:21 pm
- Model of CNC Machine: ShopSabre
- Location: Corning, Iowa USA
- Contact:
Re: Rotary Tutorial
Yes indeed Randall! Very usefull and well done. Keep it coming.
-
- Vectric Wizard
- Posts: 970
- Joined: Tue Mar 20, 2007 6:29 am
- Model of CNC Machine: ShopBot prt with 4g upgrade
- Location: Visalia, Ca
Re: Rotary Tutorial
Thanks Randell ! Now I really have no excuse, but to build a Rotary !! thanks alot
great job
Kent
great job
Kent
Re: Rotary Tutorial
Randall
Thanks for the information, well done.
I am just starting to grasp all the various concepts, and this is a nice contribution to this forum.
Regards
Greg
Thanks for the information, well done.
I am just starting to grasp all the various concepts, and this is a nice contribution to this forum.
Regards
Greg
Greg Werner
http://www.intelliviewuas.com
http://www.intelliviewuas.com
- fretsman68
- Vectric Wizard
- Posts: 1084
- Joined: Tue Sep 02, 2008 7:16 pm
- Location: Pa. USA
Re: Rotary Tutorial
Ok, where's the "not worthy" smily!!
Nice work and thank you Mr. Newcomb
Dave
Nice work and thank you Mr. Newcomb
Dave
--------------
Dave
Dave
- glenn
- Vectric Wizard
- Posts: 582
- Joined: Wed Jul 02, 2008 11:23 pm
- Model of CNC Machine: home brew 40x20
- Location: McArthur, Ohio U.S.A.
Re: Rotary Tutorial
Randall,
Thanks,
Glenn
Thanks,
Glenn
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Rotary Tutorial
Very Nice Randall,
I don't know how I missed this post. It would have saved me some time.
Thanks for the effort,
Michael
I don't know how I missed this post. It would have saved me some time.
Thanks for the effort,
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Rotary Tutorial
I've added additional material including a section on replicating an existing design in Aspire for rotary machining.
->Link
->Link
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Rotary Tutorial
Excellent work on the tutorial Randall. I plan to set up a rotray indexer soon, the parts are in the mail. The Aspire Rotary Wrapper, John Seiler's post http://www.vectric.com/forum/viewtopic. ... 73&start=0, Bill Schober's post http://www.vectric.com/forum/viewtopic. ... 62&start=0 and your tutorial have motivated me to get going.