Couple new ones

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
Kimon
Vectric Craftsman
Posts: 221
Joined: Wed Jul 05, 2006 3:21 pm

Couple new ones

Post by Kimon »

Couple of new test runs
Attachments
100_0965.JPG
Faux Copper patina with a vector art 3d clip of a sailboat (thanks James your work makes me look good)
1/4" Endmill for roughing, 1/4" Ball Nose for finish, 1/2" vibit for v-carve
Rattle Can Copper, Latex turquose
(550.4 KiB) Downloaded 338 times
100_0964.JPG
Faux aged and distressed French Country House Plaque
1/4 end mill for roughing 120 degree 1.5 inch v-bit for finish and vcarve
Rattle Can White primer 2lb Shellac sand to distress, shellac with a spit coat.
(497.44 KiB) Downloaded 353 times

User avatar
Tony Mac
Vectric Alumni
Posts: 1985
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK
Contact:

Post by Tony Mac »

Hi Kimon,

Nice signs and it sure looks like the Techno router is earning its keep.

Tony

User avatar
Les_linton
Vectric Craftsman
Posts: 148
Joined: Sun May 28, 2006 5:52 pm
Model of CNC Machine: ViperX7
Location: Pekin, IL

Post by Les_linton »

Very nice Kimon!!

I'm going to have to just quit doing things for customers and do some of those things for myself...

Great work...

Les

User avatar
Les_linton
Vectric Craftsman
Posts: 148
Joined: Sun May 28, 2006 5:52 pm
Model of CNC Machine: ViperX7
Location: Pekin, IL

Post by Les_linton »

Should have asked...

Substrate???

Les

User avatar
Kimon
Vectric Craftsman
Posts: 221
Joined: Wed Jul 05, 2006 3:21 pm

Post by Kimon »

Both are 3/4" MDF Sealed with PVA Glue before priming.

User avatar
dighsx
Vectric Wizard
Posts: 939
Joined: Tue Nov 01, 2005 12:36 am
Location: Royal Oak, Michigan USA
Contact:

Post by dighsx »

I really like the faux finish on the one. Was it hard to do?
Take it easy.
Jay (www.cncjay.com)

User avatar
Paul_n
Vectric Wizard
Posts: 316
Joined: Mon Aug 22, 2005 1:12 am
Model of CNC Machine: ShopBot PR96
Location: Cartersville, Georgia

Post by Paul_n »

Kimon...

Both samples are great, I really like the copper one, and the materials
you used. Have you looked at the metal coat products from ?
http://www.sculptnouveau.com/

Attached is one that I did using the copper metal coat, and the different
spray on patinas. They also have colored waxes that add great effects.

Paul N

PS... the design was mine, with James Booth doing the great 3D file work for me !!
Attachments
Copper01.jpg
(46.17 KiB) Downloaded 237 times

User avatar
Kimon
Vectric Craftsman
Posts: 221
Joined: Wed Jul 05, 2006 3:21 pm

Post by Kimon »

Nice Paul very nice.

As you can tell I have been playing with Fauxs next project is rusted wood. Then mabye a combination piece.

Post Reply