PP for Chinese machine with DSP?
-
- Vectric Wizard
- Posts: 1000
- Joined: Fri Sep 21, 2007 1:44 pm
- Model of CNC Machine: UCCNC Router, Plasma, Laser
- Location: Australia 3781
PP for Chinese machine with DSP?
What PP are people using with Chinese machines with the DSP controller?
Got a new user here locally with a new Chinese machine that needs a bit of a hand getting started.
Greg
Got a new user here locally with a new Chinese machine that needs a bit of a hand getting started.
Greg
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: PP for Chinese machine with DSP?
what is the file extension of any other file he can import? .tap?
- DJ-Bino
- Vectric Craftsman
- Posts: 112
- Joined: Tue Apr 15, 2008 4:34 pm
- Model of CNC Machine: Versatil 1800
- Location: Germany
Re: PP for Chinese machine with DSP?
Hello Greg
here are the PP's for China DSP, NC-Easy, and CNC-WOOD
the allways write in German an the
Units = mm you can edit it it's verry
simple.
I have 4 PP's in the zip-File
one for Cut2D, one for Cut3D
one for VCarvePro and one for
PhotoVCarve
sorry for my bad englisch
DJ-Bino
here are the PP's for China DSP, NC-Easy, and CNC-WOOD
the allways write in German an the
Units = mm you can edit it it's verry
simple.
I have 4 PP's in the zip-File
one for Cut2D, one for Cut3D
one for VCarvePro and one for
PhotoVCarve
sorry for my bad englisch
DJ-Bino
- Attachments
-
- PP_NC-EASY_DSP.zip
- (5.81 KiB) Downloaded 1170 times
best regards
DJ-Bino
DJ-Bino
-
- Vectric Wizard
- Posts: 1000
- Joined: Fri Sep 21, 2007 1:44 pm
- Model of CNC Machine: UCCNC Router, Plasma, Laser
- Location: Australia 3781
Re: PP for Chinese machine with DSP?
Has not succeeded getting anything into it as yet. Hope to at least get him started.cabnet636 wrote:what is the file extension of any other file he can import? .tap?
Do you use the DSP controller? What PP do you use?
Greg
-
- Vectric Wizard
- Posts: 1000
- Joined: Fri Sep 21, 2007 1:44 pm
- Model of CNC Machine: UCCNC Router, Plasma, Laser
- Location: Australia 3781
Re: PP for Chinese machine with DSP?
Thanks for that DJ-BinoDJ-Bino wrote:Hello Greg
here are the PP's for China DSP, NC-Easy, and CNC-WOOD
I output some code with this PP and both Mach3 and NCplot found errors in it.
I realise of course, it was not designed for those programs but wondered why they found illegal lines in it.
From what I remember from my one time using the DSP, the code was very simple without much preamble.
This machine has no toolchanger and the DSP does not control spindle speed AFAIK
Thanks again, Greg
- DJ-Bino
- Vectric Craftsman
- Posts: 112
- Joined: Tue Apr 15, 2008 4:34 pm
- Model of CNC Machine: Versatil 1800
- Location: Germany
Re: PP for Chinese machine with DSP?
Hello Greg
Mach3 and NC-Plot have another format
and then the error lines are correct
The PP's are working fine with China-DSP 128MB and lower
also work with NC-EASY / CNC-GRAF and CNC-WOOD
The China Maschine can be controlled the Spindle an
the toolchange command goes.
for more information you can look
here write him a PM or an E-mail
http://www.cnc-hotspot.de/index.php?page=User&userID=5
Daniel's englisch is verry good
______________________
sorry for my bad englisch
Mach3 and NC-Plot have another format
and then the error lines are correct
The PP's are working fine with China-DSP 128MB and lower
also work with NC-EASY / CNC-GRAF and CNC-WOOD
The China Maschine can be controlled the Spindle an
the toolchange command goes.
for more information you can look
here write him a PM or an E-mail
http://www.cnc-hotspot.de/index.php?page=User&userID=5
Daniel's englisch is verry good
______________________
sorry for my bad englisch
best regards
DJ-Bino
DJ-Bino
-
- Vectric Wizard
- Posts: 1000
- Joined: Fri Sep 21, 2007 1:44 pm
- Model of CNC Machine: UCCNC Router, Plasma, Laser
- Location: Australia 3781
Re: PP for Chinese machine with DSP?
Thanks DJ-Bino
I am off to visit this machine today so I hope we have success.
Let you know how I got on.
Greg
I am off to visit this machine today so I hope we have success.
Let you know how I got on.
Greg
-
- Vectric Wizard
- Posts: 1000
- Joined: Fri Sep 21, 2007 1:44 pm
- Model of CNC Machine: UCCNC Router, Plasma, Laser
- Location: Australia 3781
Re: PP for Chinese machine with DSP?
I can report that we got the machine singing along nice.
Found that the PP "G-code Arcs (mm)(*.tap)" worked just fine.
Decided I don't like the DSP controller much.
Don't get the visual feedback of what the machine is up to and about to do like you do with Mach3.
So all in all it was a successful visit. Thanks all for the help.
Greg
Found that the PP "G-code Arcs (mm)(*.tap)" worked just fine.
Decided I don't like the DSP controller much.
Don't get the visual feedback of what the machine is up to and about to do like you do with Mach3.
So all in all it was a successful visit. Thanks all for the help.
Greg
-
- Posts: 3
- Joined: Mon Jun 04, 2018 4:46 am
- Model of CNC Machine: 1325 wood router
Re: PP for Chinese machine with DSP?
hey good day, i purchased a machine from omni in china anf im currently using Vectric aspire software, im trying to find a post processor for the machine, 4 axis rotary device and the 3 axis
- Adrian
- Vectric Archimage
- Posts: 14655
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: PP for Chinese machine with DSP?
Looks like those machines use the Syntec controllers so I'd start with one of those post processors.
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: PP for Chinese machine with DSP?
Hello,
The post processors that are most like to work for you are the "DSP ATC Arcs (mm)(*.tap)"
or the one of the "NC Studio" post processors.
I hope that this helps.
The post processors that are most like to work for you are the "DSP ATC Arcs (mm)(*.tap)"
or the one of the "NC Studio" post processors.
I hope that this helps.
- Adrian
- Vectric Archimage
- Posts: 14655
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: PP for Chinese machine with DSP?
Hi Mark, Is that correct for Lenroy? The original post was about DSP controllers but from what I can see Lenroys' machine uses a Syntec controller.
-
- Posts: 3
- Joined: Mon Jun 04, 2018 4:46 am
- Model of CNC Machine: 1325 wood router
Re: PP for Chinese machine with DSP?
my machine uses DSP controller as well, but im not seeing a post processor for the 4th axis attachment in aspire
-
- Posts: 3
- Joined: Mon Jun 04, 2018 4:46 am
- Model of CNC Machine: 1325 wood router
Re: PP for Chinese machine with DSP?
i email Vectric aspire owners to ask them about my problem and i was told to A sample of rotary code that runs on the machine
and The code format document. but im new to the cnc world, dont know how to acquire either one of those two things
and The code format document. but im new to the cnc world, dont know how to acquire either one of those two things