Gadget Bootcamp
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Boot Camp gadget video number 2
Hello all,
Have a look at video number two. I have acquired a new text to speech solution.
http://www.jimandi.com/VCarve-Tools/Vid ... Video.html
Your feedback is always welcome.
Hello all,
Have a look at video number two. I have acquired a new text to speech solution.
http://www.jimandi.com/VCarve-Tools/Vid ... Video.html
Your feedback is always welcome.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Here is a copy of the code if you want.
- Attachments
-
- Lua_Video_02.zip
- (3.07 KiB) Downloaded 108 times
Thanks,
Jim
Jim
-
- Vectric Craftsman
- Posts: 182
- Joined: Thu May 14, 2015 12:29 am
- Model of CNC Machine: AVID PRO-Acorn , Shapeoko SO3 XXL & SO3s
- Location: Colorado
- Contact:
Re: Gadget Bootcamp
Jim,
Thanks for taking the time and putting these videos together. This is one of those things on my bucket list to get to so I could understand how to do it.
The only comment that I have is if you could show an overview and purpose of the gadget during the video introduction prior to getting into to the code editing it would help (in my case) with understanding what each line edit is accomplishing.
Thanks
Craig
Thanks for taking the time and putting these videos together. This is one of those things on my bucket list to get to so I could understand how to do it.
The only comment that I have is if you could show an overview and purpose of the gadget during the video introduction prior to getting into to the code editing it would help (in my case) with understanding what each line edit is accomplishing.
Thanks
Craig
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hi Craig,
Okay,
Thanks for the feedback. I will see if I can integrate some code editing in the next video (4).
Are you using Zero Brains studio is your editor?
Okay,
Thanks for the feedback. I will see if I can integrate some code editing in the next video (4).
Are you using Zero Brains studio is your editor?
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Boot Camp gadget video number 3
Hello all,
Have a look at video number three.
Your feedback is always welcome.
Hello all,
Have a look at video number three.
Your feedback is always welcome.
- Attachments
-
- Lua_Video_03.zip
- (5.28 KiB) Downloaded 104 times
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hi All,
This is what I have in the works for the next videos:
Video 4
Tread and Riser Thickness
Video 5
Adding a Stair stringer
Video 6
Storing and retrieving user variables to the register
Video 7
Building a HTML Graphical user interface
Connecting a HTML Graphical user interface
Video 8
Writing a bill of materials to a file
Video 9
Tool database and Toolpaths
Video 10
Zero Brains Studio
Debugging your code
Making Zero Brains Studio smart
Do you seen anything missing or something you would like to see?
This is what I have in the works for the next videos:
Video 4
Tread and Riser Thickness
Video 5
Adding a Stair stringer
Video 6
Storing and retrieving user variables to the register
Video 7
Building a HTML Graphical user interface
Connecting a HTML Graphical user interface
Video 8
Writing a bill of materials to a file
Video 9
Tool database and Toolpaths
Video 10
Zero Brains Studio
Debugging your code
Making Zero Brains Studio smart
Do you seen anything missing or something you would like to see?
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Boot Camp gadget video number 4
Hello all,
Have a look at video number four.
http://www.jimandi.com/VCarve-Tools/Vid ... Video.html
Your feedback is always welcome.
Hello all,
Have a look at video number four.
http://www.jimandi.com/VCarve-Tools/Vid ... Video.html
Your feedback is always welcome.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hello all,
I have moved my Gadget Boot Camp Video's to new YouTube channel. This move will add a lot of functionality I currently don't have my own website. Items such as, look and feel, search-ability, feedback, close caption, and multiple language support just to name a few. I have recompiled all of the videos (4) utilizing the new text to voice software and also have standardized on fonts and entry screens.
Please have a look and as always your feedback is always welcome.
So now I am back to work on building video five, adding the stringer.
I have moved my Gadget Boot Camp Video's to new YouTube channel. This move will add a lot of functionality I currently don't have my own website. Items such as, look and feel, search-ability, feedback, close caption, and multiple language support just to name a few. I have recompiled all of the videos (4) utilizing the new text to voice software and also have standardized on fonts and entry screens.
Please have a look and as always your feedback is always welcome.
So now I am back to work on building video five, adding the stringer.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hello boys and girls,
I hope each of you had a wonderful Christmas and New Year's.
To kick off 2020, I have just completed the video five of the Boot Camp series.
Developing a gadget to the next step, drawing the stringer and doing a code review.
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here's a link to video five: https://youtu.be/JDDqMp0UgYI
I hope each of you had a wonderful Christmas and New Year's.
To kick off 2020, I have just completed the video five of the Boot Camp series.
Developing a gadget to the next step, drawing the stringer and doing a code review.
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here's a link to video five: https://youtu.be/JDDqMp0UgYI
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hello All,
Video 6 has been posted.
Video 6: Storing and retrieving user variables to the register
Here is the link to the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_06.zip
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here is the link to the video: https://youtu.be/p22QIBBlOug
Video 6 has been posted.
Video 6: Storing and retrieving user variables to the register
Here is the link to the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_06.zip
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here is the link to the video: https://youtu.be/p22QIBBlOug
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hi there,
A new Boot Camp video has been uploaded.
Video 7
Building a HTML Graphical user interface
Connecting a HTML Graphical user interface
Here is the link to all of the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_07.zip
Youtube Channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Video 07 is here: https://youtu.be/QJbEDdyq0TE
A new Boot Camp video has been uploaded.
Video 7
Building a HTML Graphical user interface
Connecting a HTML Graphical user interface
Here is the link to all of the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_07.zip
Youtube Channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Video 07 is here: https://youtu.be/QJbEDdyq0TE
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hello All,
I have posted Video 8 to YouTube channel.
Video 8
Adding a bill of materials function and writing to a DAT and TXT file.
Link to the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_08.zip
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here is the link to the video: https://youtu.be/_0onaKIpORg
I have posted Video 8 to YouTube channel.
Video 8
Adding a bill of materials function and writing to a DAT and TXT file.
Link to the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_08.zip
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here is the link to the video: https://youtu.be/_0onaKIpORg
- Attachments
-
- Lua_Video_08.zip
- (134.43 KiB) Downloaded 97 times
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Gadget Bootcamp
Hi there,
I have banged out number 9 for your viewing pleasure.
I am now working on Video 10 the ZeroBrane Studio a how to on Debugging your code and making Making ZeroBrane Studio smarter and offer tool tips on Vectric coding functions.
---------
Video 9
Tool database and Toolpaths
Here is the link to the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_09.zip
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here is the link to the video: https://youtu.be/SuhlfNyvqU8
I have banged out number 9 for your viewing pleasure.
I am now working on Video 10 the ZeroBrane Studio a how to on Debugging your code and making Making ZeroBrane Studio smarter and offer tool tips on Vectric coding functions.
---------
Video 9
Tool database and Toolpaths
Here is the link to the files: http://www.jimandi.com/VCarve-Tools/Vid ... deo_09.zip
Here is the link to the channel: https://www.youtube.com/channel/UCSM4fW ... 1nTzIe554Q
Here is the link to the video: https://youtu.be/SuhlfNyvqU8
- Attachments
-
- Lua_Video_09.zip
- (153.7 KiB) Downloaded 82 times
Thanks,
Jim
Jim