I made him tonight and I love him thank you stephanie!Stephanie Downing wrote:On the third day of Christmas my true love gave to me, a Nordic Santa ornament!
This cute Nordic inspired Santa character has been carefully modelled in Aspire (take a look at the video to see how it's modelled)
The ornament has a flat bottom so it can stand upright and is machined using three toolpaths, a roughing toolpath (1/4”End Mill), a finishing toolpath (1/8” Tapered Ball Nose) and a Profile toolpath (1/4” End Mill). Once machined the Santa ornament requires minimal cleanup, just a sand to remove the tabs and lift off any fuzzies.
The part was finished by applying a stain followed by a coat of shellac to accentuate the details!
Download the free project files and watch the full video on how this project was made now: https://www.vectric.com/vectric-communi ... ordicSanta
Happy making!
COMING SOON - 12 Projects of Christmas
-
- Posts: 20
- Joined: Thu May 02, 2019 10:43 pm
- Model of CNC Machine: AR8 PRO
Re: COMING SOON - 12 Projects of Christmas
-
- Posts: 20
- Joined: Thu May 02, 2019 10:43 pm
- Model of CNC Machine: AR8 PRO
Re: COMING SOON - 12 Projects of Christmas
I made him tonight and he is adorable thank you for sharing him!Stephanie Downing wrote:On the third day of Christmas my true love gave to me, a Nordic Santa ornament!
This cute Nordic inspired Santa character has been carefully modelled in Aspire (take a look at the video to see how it's modelled)
The ornament has a flat bottom so it can stand upright and is machined using three toolpaths, a roughing toolpath (1/4”End Mill), a finishing toolpath (1/8” Tapered Ball Nose) and a Profile toolpath (1/4” End Mill). Once machined the Santa ornament requires minimal cleanup, just a sand to remove the tabs and lift off any fuzzies.
The part was finished by applying a stain followed by a coat of shellac to accentuate the details!
Download the free project files and watch the full video on how this project was made now: https://www.vectric.com/vectric-communi ... ordicSanta
Happy making!
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: COMING SOON - 12 Projects of Christmas
This was cut from a piece of Padauk and oil finished. The only change was to add a radius to the inside and outside of the border.
I think I'll add some veining to the Holly Leaves and cut a second one.
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: COMING SOON - 12 Projects of Christmas
Hey All,
I see a few of you have been busy with the projects, thank you for sharing them with us they all look amazing!
Thank you!
Beki
I see a few of you have been busy with the projects, thank you for sharing them with us they all look amazing!
Thank you!
Beki
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
Re: COMING SOON - 12 Projects of Christmas
not letting me post my photo of my jewlery box i did any help
Re: COMING SOON - 12 Projects of Christmas
here is my jewlery box i`ve made and did 2 more will be doing 5 ty for all these projects its helping me learn as well
Re: COMING SOON - 12 Projects of Christmas
and here is my roaster it took me 24 hours do to the first one tail was short lol but roaster took me like 12 hours ill be fixing it up some as well
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: COMING SOON - 12 Projects of Christmas
You’ve been mighty busy, gibson22! Thank you for sharing the photos with us!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
Re: COMING SOON - 12 Projects of Christmas
realy nice workscotttarnor wrote:Thank You so much for all the Gifts ! I have only been able to complete one and the Granddaughter loves it !
-
- Vectric Wizard
- Posts: 301
- Joined: Wed Apr 13, 2016 3:38 am
- Model of CNC Machine: Axiom Pro6
- Location: No. Calif.
Re: COMING SOON - 12 Projects of Christmas
Am I wrong, or do you need V-10 to enjoy these projects? A little disappointing, if you do.
Mark
Pioneer, CA
Pioneer, CA
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: COMING SOON - 12 Projects of Christmas
Hi redwood,
Each of the Free projects should be labeled on its description webpage with what software (Aspire or VCarve) and what version of the software you will need to be able to run the project. That way, you can see which projects are going to work with the software version you are using.
Naturally, older projects are compatible with older software versions and newer projects require newer software versions.
Each of the Free projects should be labeled on its description webpage with what software (Aspire or VCarve) and what version of the software you will need to be able to run the project. That way, you can see which projects are going to work with the software version you are using.
Naturally, older projects are compatible with older software versions and newer projects require newer software versions.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 301
- Joined: Wed Apr 13, 2016 3:38 am
- Model of CNC Machine: Axiom Pro6
- Location: No. Calif.
Re: COMING SOON - 12 Projects of Christmas
As I assumed, I have Aspire 9.5. Even though some of the Xmas projects use the most basic toolpaths, that were probably available in the first version of V-Carve, they were created in V-10 and apparently not backward compatible. I guess I understand that, but I would think with the spirit of Xmas that some compatibility with slightly older versions would be available. I guess they have to draw the line somewhere and that is with the most current version.
Mark
Pioneer, CA
Pioneer, CA
-
- Posts: 7
- Joined: Thu Oct 17, 2019 11:07 pm
- Model of CNC Machine: Workbee
- Location: Fort Collins, Colorado USA
Re: COMING SOON - 12 Projects of Christmas
Merry Christmas and thanks for all the gifts, Vectric! The projects are a great way to get acquainted with CNC and the software.
Boycott Black Friday almost worked. I was excited to make some snowflakes and use up some thin scraps of wood that had been lying around for years. Not having a small cutter sent me out to the local woodworking store to deal with the traffic and crowds on Black Friday though. In the end, it was worth the hassle because the snowflakes are very popular! My Merry Christmas sign was most fun because I got to combine elements from two projects and apply lessons learned from both. Applying them to an old piece of weathered barn wood made it really interesting. Now all I have to do is figure out how I'm going to finish it. LOL Thanks for the lessons, Beki and Todd! I'm excited to get going on some more.
Russ
Boycott Black Friday almost worked. I was excited to make some snowflakes and use up some thin scraps of wood that had been lying around for years. Not having a small cutter sent me out to the local woodworking store to deal with the traffic and crowds on Black Friday though. In the end, it was worth the hassle because the snowflakes are very popular! My Merry Christmas sign was most fun because I got to combine elements from two projects and apply lessons learned from both. Applying them to an old piece of weathered barn wood made it really interesting. Now all I have to do is figure out how I'm going to finish it. LOL Thanks for the lessons, Beki and Todd! I'm excited to get going on some more.
Russ
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: COMING SOON - 12 Projects of Christmas
Very nice contrast with the barn board one Russ!!
Like it!!
Like it!!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: COMING SOON - 12 Projects of Christmas
I love the barn board plaque, too! Who knew there was such bright wood underneath that patina? Beautiful!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC