It's just a simple VCarving and would work in either Aspire or VC.
Create everyday.
Hall of Lines
-
nicksilva
- Vectric Craftsman
- Posts: 298
- Joined: Thu Aug 21, 2014 8:13 pm
- Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark
- Location: Dallas, TX USA
- Contact:
Hall of Lines
Broke in my 10.0 with this 3D illusion piece. 4.5” in Mesquite.
It's just a simple VCarving and would work in either Aspire or VC.
Create everyday.
It's just a simple VCarving and would work in either Aspire or VC.
Create everyday.
"Out of my mind. Back in 5 Minutes."
-
scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Hall of Lines
Nice piece Nick!
Though my first thought was "That would be a tough path with a wheelchair to change your mind on"
Thanks!
scott
Though my first thought was "That would be a tough path with a wheelchair to change your mind on"
Thanks!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
nicksilva
- Vectric Craftsman
- Posts: 298
- Joined: Thu Aug 21, 2014 8:13 pm
- Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark
- Location: Dallas, TX USA
- Contact:
Re: Hall of Lines
thank you. yeah, it should probably be River of lines, 'cause if you're caught up in the current - well you know/
"Out of my mind. Back in 5 Minutes."
-
Leo
- Vectric Wizard
- Posts: 4090
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Hall of Lines
Knowing you -- I think you would get in the groove and just GO.scottp55 wrote:Nice piece Nick!
Though my first thought was "That would be a tough path with a wheelchair to change your mind on"
Thanks!
scott
I don't think there is much holding you back.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Hall of Lines
Thanks Leo, but on this one I'd just have pick a groove and trust Nick not to take me to a waterfall or a Rabbit Hole
Nice 3D Delusion Nick:)
scott
Nice 3D Delusion Nick:)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
nicksilva
- Vectric Craftsman
- Posts: 298
- Joined: Thu Aug 21, 2014 8:13 pm
- Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark
- Location: Dallas, TX USA
- Contact:
Re: Hall of Lines
what do you think is around the corner?scottp55 wrote:....I'd just have pick a groove and trust Nick not to take me to a waterfall or a Rabbit Hole......
scott
"Out of my mind. Back in 5 Minutes."
-
scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Hall of Lines
Reminded me of a wildwater race in Massachusetts Nick:)
Scoped out the river the day before, and picked out our lines.....THEN the day of the race they opened 3 more sluices on the dam above
Another 4 feet of water, and wasn't a problem for most of the wildwater, BUT there was a GORGE with what WAS a 5 foot drop and only one real way to go over, that lead you directly to the only path through the Class4 "Rock Garden" below.
NOW it was 8-10 foot drop with a WHIRLPOOL in the center, and 60 foot wide selection of ledge choices, and "Rock Garden" now had 10 ways in, BUT only ONE led you to the main river stream
Three wetsuited dive teams at the drop that were kept busy, and paddlers from cross country were madly scrambling and carrying their boats over the Garden when the paths they were washed into petered out to boulders
Probably a 100 foot waterfall Nick!!!!
Scoped out the river the day before, and picked out our lines.....THEN the day of the race they opened 3 more sluices on the dam above
Another 4 feet of water, and wasn't a problem for most of the wildwater, BUT there was a GORGE with what WAS a 5 foot drop and only one real way to go over, that lead you directly to the only path through the Class4 "Rock Garden" below.
NOW it was 8-10 foot drop with a WHIRLPOOL in the center, and 60 foot wide selection of ledge choices, and "Rock Garden" now had 10 ways in, BUT only ONE led you to the main river stream
Three wetsuited dive teams at the drop that were kept busy, and paddlers from cross country were madly scrambling and carrying their boats over the Garden when the paths they were washed into petered out to boulders
Probably a 100 foot waterfall Nick!!!!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
nicksilva
- Vectric Craftsman
- Posts: 298
- Joined: Thu Aug 21, 2014 8:13 pm
- Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark
- Location: Dallas, TX USA
- Contact:
Re: Hall of Lines
DANG! And I have trouble jumping into the deep end of the pool.scottp55 wrote:Reminded me of a wildwater race in Massachusetts Nick:)
Probably a 100 foot waterfall Nick!!!!
"Out of my mind. Back in 5 Minutes."
-
scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Hall of Lines
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA