VCarve Version 10 - Photo V-Carve toolpath

This section is for useful tips and tricks for Aspire
Post Reply
User avatar
mezalick
Vectric Wizard
Posts: 2970
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

VCarve Version 10 - Photo V-Carve toolpath

Post by mezalick »

Here's a few examples of what you can do with the new Version 10 with the VCarve toolpath option.
Using your own vectors opens a wide range of possibilities.

If you want to see more, here are the links to some short videos.
Hitch


Fish



Enjoy,
Michael
Attachments
Adding small details.JPG
Twilght-Zone-1.jpg
Hitch 2.JPG
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com

User avatar
Mark
Vectric Staff
Posts: 1054
Joined: Sat Aug 18, 2007 2:55 pm
Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
Location: Alcester U.K.
Contact:

Re: VCarve Version 10 - Photo V-Carve toolpath

Post by Mark »

Please Note:

Michael of course meant - VCarve Version 10 - Photo V-Carve toolpath,
not PhotoVCarve V10.
There is no version 10 of PhotoVCarve.

Cheers,

Mark.

User avatar
mezalick
Vectric Wizard
Posts: 2970
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: VCarve Version 10 - Photo V-Carve toolpath

Post by mezalick »

Thanks Mark,
It's what I ment to say.
The Toolpath option in the VCarve and Aspire Version 10....
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: VCarve Version 10 - Photo V-Carve toolpath

Post by scottp55 »

Thanks Michael!!
"FISH" is bookmarked for when caffeinated tomorrow :)
Looks interesting!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
rtibbs
Vectric Wizard
Posts: 411
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: VCarve Version 10 - Photo V-Carve toolpath

Post by rtibbs »

Having just upgraded to Aspire 10, tell me why I recently purchased PhotoVcarve :oops:

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: VCarve Version 10 - Photo V-Carve toolpath

Post by martin54 »

rtibbs2018 wrote:Having just upgraded to Aspire 10, tell me why I recently purchased PhotoVcarve :oops:
Probably because like me you forgot to clean your crystal ball :lol: :lol: :lol:

Thanks Michael, never could get the hang of photovcarve, hoping these may help :lol: :lol: :lol:

Post Reply