bootjack
-
- Vectric Wizard
- Posts: 862
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: bootjack
Thank you, these things come in handy!
Bob
Bob
Re: bootjack
sawmiller wrote:i needed a bootjack, so i made this file.
instructions are included.
Sorry to be naive, but what is a bootjack?
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: bootjack
Excellent timing. I've needed to make one of these to get my work boots off. Thank you for the plan.
- SteveNelson46
- Vectric Wizard
- Posts: 2311
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: bootjack
ezurick wrote:sawmiller wrote:i needed a bootjack, so i made this file.
instructions are included.
Sorry to be naive, but what is a bootjack?
Steve
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
Re: bootjack
You step on a bootjack with one foot and catch the back of your other boot in its crotch, allows handless removal of boots, usually dirty..
The nice thing is if you just do the profile cut, it takes 2 min and 40 seconds to cut it out with a smooth finish to the cut using last pass.
Im not that fast on the bandsaw, and then having to remove marks.
Good for scraps as gifts
The nice thing is if you just do the profile cut, it takes 2 min and 40 seconds to cut it out with a smooth finish to the cut using last pass.
Im not that fast on the bandsaw, and then having to remove marks.
Good for scraps as gifts
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn
Re: bootjack
Thanks for explaining and showing me what a bootstrap is. I guess I knew, but wasn't sure. I don't wear boots like that, so I guess that is also why I was unsure.
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
Re: bootjack
From scraps
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn
- sharkcutup
- Vectric Wizard
- Posts: 2928
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: bootjack
Downloaded and Changed the Font to a HAYMAKER font style (downloaded previously not part of the V-Carve font library) which is a more western style look for when I get around to making mine.
Great Idea and Thank you for Sharing!
Sharkcutup
Great Idea and Thank you for Sharing!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005