Help
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Help
Need a LITTLE more info on the problem than THAT Woody:)
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Help
Hmmm......Seems to be working for me Woody...at least for these two with the setting shown in the second one.
Oh....Irfanview is a free basic photo editor.
scott
Oh....Irfanview is a free basic photo editor.
scott
Last edited by scottp55 on Sun Aug 18, 2019 4:57 pm, edited 1 time in total.
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- sharkcutup
- Vectric Wizard
- Posts: 2885
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Help
I wonder if there is a limit to the amount of files uploaded? I do know they are stored in your user control panel under >front page>Manage Attachments. You are able to view them and delete them as desired. You may want to try to delete some of the older ones then try to add a new one again in the post you are not having any uploading success in.
Just a refresher here and for any newbies out there:
Uploading images you must click choose file first and select a file from your computer you wish to upload. Then Click add and it will upload to the forums memory. Then you click where you want the file to appear in your thread message. Then click the button below which says Place inline to add it to your threaded message.
Just some Thoughts!
Sharkcutup
Just a refresher here and for any newbies out there:
Uploading images you must click choose file first and select a file from your computer you wish to upload. Then Click add and it will upload to the forums memory. Then you click where you want the file to appear in your thread message. Then click the button below which says Place inline to add it to your threaded message.
Just some Thoughts!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Help
Seems to be working fine.
You might try using a image editor app to reduce the size and try again.
You might try using a image editor app to reduce the size and try again.
John
Maker of Chips
Maker of Chips
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Help
try reducing the size a bit more, I know the blurb says max size 2mb but for some reason it will refuse jpeg images that are smaller than that sometimes. Often for me just making then a little smaller is enough for them to upload
So I wasn't really close with my other post then
So I wasn't really close with my other post then
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Help
PRETTY piece Dave!!!
Yep...when I have a "Portrait" orientation.....I have to use the next default resolution down in my image software on the forum.
scott
Yep...when I have a "Portrait" orientation.....I have to use the next default resolution down in my image software on the forum.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Help
Certainly looks good to me!!
Nice job!!
scott
Nice job!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.