Just another day cutting doors with Aspire
- dealguy11
- Vectric Wizard
- Posts: 2497
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Just another day cutting doors with Aspire
OK, maybe 3 or 4 days.
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Just another day cutting doors with Aspire
NICE selection there Steve!!
Be glad I don't work in your shop.....somewhere in that pile would be a door with a transposed digit!
Is that how you do it...one whole house or project at a time?
Well done and pretty sure it was in a timely manner
scott
Be glad I don't work in your shop.....somewhere in that pile would be a door with a transposed digit!
Is that how you do it...one whole house or project at a time?
Well done and pretty sure it was in a timely manner
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- dealguy11
- Vectric Wizard
- Posts: 2497
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Re: Just another day cutting doors with Aspire
One project at a time. There are 2 projects in those piles...a huge closet and a kitchen. Will do another closet tomorrow...another 6 sheets or so. Then have a kitchen behind that. The kitchen will be a challenge as it includes fluted columns and I no longer have a 4th axis machine, so will have to make some indexing jigs.
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost