Quick project for a friend
- Rcnewcomb
- Vectric Archimage
- Posts: 5886
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Quick project for a friend
In poplar, measures about 8x18. I used a 120 degree V bit for the bevel and cut it out with a 0.25" end mill. The type face is Celtic Garamond. Machine time was just under 7 minute.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Quick project for a friend
Nice look. Different.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Quick project for a friend
The 120* chamfer goes very well with the font Randall!
Pleasing look!
scott
Pleasing look!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.