Milling on an inclined profile (3D)
-
- Posts: 10
- Joined: Fri Apr 06, 2012 8:46 am
- Model of CNC Machine: INFOTEC
Milling on an inclined profile (3D)
Hi,
I need help
I have to cut a CNC element on these two paths ( please see image and 3D file ).
Can you someone help me generate these paths? Tool is 12mm cutter , the detail is cut out from material 140 x 140 x 40mm.
Thank you in advance for your help.
I need help
I have to cut a CNC element on these two paths ( please see image and 3D file ).
Can you someone help me generate these paths? Tool is 12mm cutter , the detail is cut out from material 140 x 140 x 40mm.
Thank you in advance for your help.
- Attachments
-
- swieca-duza..crv3d
- (106.5 KiB) Downloaded 49 times
- Adrian
- Vectric Archimage
- Posts: 14650
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Milling on an inclined profile (3D)
You created that file with the trial version. It can only be opened on the computer you used so no-one here will be able to see it.
- adze_cnc
- Vectric Wizard
- Posts: 4367
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Milling on an inclined profile (3D)
The outside cut is trivial. The spigot cut seems to me a good candidate for the fluting toolpath.
- dealguy11
- Vectric Wizard
- Posts: 2486
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510
- Location: Henryville, PA
Re: Milling on an inclined profile (3D)
If you already have components set up for the angled circle, then the path can be cut with profile toolpath with the "project toolpath onto 3d model" option checked, BUT it probably won't be right if you use a flat-bottomed bit because Aspire calculates the toolpath height from the center of the bit, so the "uphill" side will dig into the part. A ballnose bit won't have that problem, but it will leave a radius on both sides of the bit. That's also true with a fluting toolpath.
This could also be done with a carving toolpath and a small ballnose bit. You'd still get a radius on the inside of the included circle, but it could be small with a small enough bit.
This could also be done with a carving toolpath and a small ballnose bit. You'd still get a radius on the inside of the included circle, but it could be small with a small enough bit.
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost
- TReischl
- Vectric Wizard
- Posts: 4645
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Milling on an inclined profile (3D)
The way that is drawn would require a machine with more than 3 axis of motion. The closest I could get was with a rotary. It is possible to draw things that are not easily machined or downright impossible. Knowing what the part is going to be used for would be a big help. If it is a cam then there is no reason for it to be planar.
"If you see a good fight, get in it." Dr. Vernon Johns
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
- Vectric Wizard
- Posts: 1717
- Joined: Sun Sep 23, 2012 12:14 pm
- Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"
Re: Milling on an inclined profile (3D)
The only way I could image creating the part shown is using two pieces. Start with a piece as thick as the lower half, cut the slope using the moulding toolpath or fluting array strategy. Pocket a circular hole in the middle and glue in a previously made cylinder that fits snugly, then cut a slope on the top of that piece using the moulding toolpath or fluting array strategy. Finish by profile cutting out the bottom circle from its surrounding board.
To cut a flat planar slope around the center section is impossible. You could at best get close using a small bit and a 3D toolpath. Followed by some hand work.
4D
To cut a flat planar slope around the center section is impossible. You could at best get close using a small bit and a 3D toolpath. Followed by some hand work.
4D
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Milling on an inclined profile (3D)
Is the top beveled also or is it just an optical illusion?
John
Maker of Chips
Maker of Chips
-
- Posts: 10
- Joined: Fri Apr 06, 2012 8:46 am
- Model of CNC Machine: INFOTEC
Re: Milling on an inclined profile (3D)
Yes highpockets
Please, can you made path based on a model that I just attached to my answer and send such a file to me? Thanks for all help
https://we.tl/t-5HVCQlXIKQ
Please, can you made path based on a model that I just attached to my answer and send such a file to me? Thanks for all help
https://we.tl/t-5HVCQlXIKQ
-
- Posts: 10
- Joined: Fri Apr 06, 2012 8:46 am
- Model of CNC Machine: INFOTEC
Re: Milling on an inclined profile (3D)
I do not need to draw this solid in Aspire, I just want to achieve the goal and assign the milling path marked in the attached drawing.
https://imgur.com/a/oXCDAlE
https://imgur.com/a/oXCDAlE
- TReischl
- Vectric Wizard
- Posts: 4645
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Milling on an inclined profile (3D)
The issues have been explained to you. Since you have the model why don't you assign the tooling path?energysnake wrote:I do not need to draw this solid in Aspire, I just want to achieve the goal and assign the milling path marked in the attached drawing.
https://imgur.com/a/oXCDAlE
As several of us have stated, this part as you have drawn it, will not machine properly on a 3 axis machine. Not sure what you do not understand about that?
"If you see a good fight, get in it." Dr. Vernon Johns
- FixitMike
- Vectric Wizard
- Posts: 2176
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Milling on an inclined profile (3D)
Here's how I did it.
1. Select a Flat_Round_Circle from the ClipArt
2. Enlarge it so it is larger than the larger cylinder diameter.
3. In Component Properties, Tilt to the angle of the slope you wish.
4. Draw 2 circular vectors that are the diameters of the 2 cylinders.
5. Make a finish toolpath, selecting the 2 circular vectors for the Machining Limit Boundary. Use a small end mill.
6. Cut out the larger diameter using a profile toolpath.
Note that the sloped surface won't be a perfectly flat surface. There will be a horizontal flat at the lower end that is the width of the diameter of the end mill used.
1. Select a Flat_Round_Circle from the ClipArt
2. Enlarge it so it is larger than the larger cylinder diameter.
3. In Component Properties, Tilt to the angle of the slope you wish.
4. Draw 2 circular vectors that are the diameters of the 2 cylinders.
5. Make a finish toolpath, selecting the 2 circular vectors for the Machining Limit Boundary. Use a small end mill.
6. Cut out the larger diameter using a profile toolpath.
Note that the sloped surface won't be a perfectly flat surface. There will be a horizontal flat at the lower end that is the width of the diameter of the end mill used.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- FixitMike
- Vectric Wizard
- Posts: 2176
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Milling on an inclined profile (3D)
Corrections to my post:
Item 5: The finish toolpath permits only a ball end tool to be used.
The note should read: "There will be a radius in the inside corner between the small cylinder and the slope equal to the ball end tool radius.
Item 5: The finish toolpath permits only a ball end tool to be used.
The note should read: "There will be a radius in the inside corner between the small cylinder and the slope equal to the ball end tool radius.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Milling on an inclined profile (3D)
Energysnake, Fixitmike has presented an excellent method to achieve what you want.
John
Maker of Chips
Maker of Chips