American Flag / Navy
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
American Flag / Navy
Wood Cherry
Size 22" x 17"
Finish Conversion Varnish
Software Aspire 9.517V
Flag D&M
Navy Emblem I created
Thank You
Doug
Doug
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: American Flag / Navy
Love it! I notice you signed it in the lower part of the banner.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: American Flag / Navy
WELL done Sir!!
Cherry face grain can argue with you sometimes in 3D...NOT in YOURS!
Superb finish! What was final grit? # of coats required?
WELL done!!
scott
Cherry face grain can argue with you sometimes in 3D...NOT in YOURS!
Superb finish! What was final grit? # of coats required?
WELL done!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Re: American Flag / Navy
Scott
I sanded it to 150 grit and applied two coats of Conversion Varnish
I sanded it to 150 grit and applied two coats of Conversion Varnish
Thank You
Doug
Doug
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: American Flag / Navy
Thank you Doug!
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.