Hide Toolpath
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Hide Toolpath
Under Toolpath if you Right-Click you get the option Hide/This or Hide/All. I searched help, but can't find any info on this option. I tried clicking Hide/This, but I saw nothing change. It still ran after I clicked Preview All Toolpaths. Is there a way to hide a toolpath? Sometimes I only want a toolpath to run for testing, or adding color to a section.
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Hide Toolpath
Hiding is the basically turning the visibility of the toolpath off which is also done by unchecking the check box next to the toolpath.
Preview All Toolpaths will always run all toolpaths regardless of visibility. If you click Preview Visible Toolpaths you should see the difference.
Preview All Toolpaths will always run all toolpaths regardless of visibility. If you click Preview Visible Toolpaths you should see the difference.
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Hide Toolpath
Gotit... tnx