Buckethead litho

Gallery for images of work cut using PhotoVCarve
Post Reply
User avatar
Xxray
Vectric Wizard
Posts: 2300
Joined: Thu Feb 17, 2011 8:47 am
Model of CNC Machine: CAMaster Stinger 1
Location: MI USA

Buckethead litho

Post by Xxray »

This one turned out great, super detailed. Took over 6 hours but was well worth it, is about 8x10 and used a 1/32 bit . Actually busted through at the very top of the bucket, very depressing, but I glued a thin corian patch on it and to my surprise, you can barely tell its there. Pic taken just holding it up to a light, I plan on making a multi color LED light box for it, will post back when able to detail my process.

https://imgur.com/a/VtzzgYW


[To those who don't know who Buckethead is, its a long story. Guy is a breathtaking lead guitarist and is a very eccentric guy, very little is known about him. IMO, he is better than Hendrix, that good] A prolific talent, he has over 300 CDs out, yes, 300 and mostly instrumentals

Doug

woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: Buckethead litho

Post by woody53 »

As always ,Doug, your litho looks great. I know who buckethead is, and as you said is phenomenal. Used to see lithos on here all the time, guess times change. Keep up the great work.

Dave

Post Reply