Aspire at the Martin Guitar factory

Post by **Rcnewcomb** » Mon Jun 10, 2019 6:40 pm

Both of the ShopBot desktops in their custom shop were using Aspire.

Post by **scottp55** » Mon Jun 10, 2019 7:52 pm

Thanks Randall!!
Any idea of the spindle and MUNGO VFD they're using?
VERY nice to see them using my model machine!!

Post by **mtylerfl** » Mon Jun 10, 2019 8:47 pm

Very cool!

Post by **Rcnewcomb** » Wed Jun 12, 2019 11:43 pm

Here is an example of what they are making

Post by **ger21** » Thu Jun 13, 2019 3:11 am

scottp55 wrote: Any idea of the spindle and MUNGO VFD they're using?

Probably similar to this.

https://www.ebay.com/itm/PRECISE-ESC304 ... 2286389817

Post by **scottp55** » Thu Jun 13, 2019 1:02 pm

Thanks Gerry!
VERY specialized for it's purpose, AND expensive in other words.
I've wondered at times, getting something with more than my HSD 18,000RPM...but the trade-offs to get 50K?....I'll stick with mine for now

Interesting how it was automatic tool change on the SHANK, AND had a spring loaded head!
Barely understood all of my Dad's Big Iron$$$ CNCs(all 9 of them),and was totally lost on the one that needed a new building with a 29'roof and worked with either vac or oil filled cutting chamber.
I know a Lot..about a Little!
I appreciate it Gerry!
scott

Vectric Customer

Aspire at the Martin Guitar factory

Aspire at the Martin Guitar factory

Re: Aspire at the Martin Guitar factory

Re: Aspire at the Martin Guitar factory

Re: Aspire at the Martin Guitar factory

Re: Aspire at the Martin Guitar factory

Re: Aspire at the Martin Guitar factory