Material: Lowes 2.5x2.5 in Poplar
Rounded with a 1/5" end mill
Cut using a 120° V-bit
Total cut time 17 minutes and 6 seconds
Rotary with a 120° V-bit
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Rotary with a 120° V-bit
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Rotary with a 120° V-bit
Kinda Liking that one Randall!
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Rotary with a 120° V-bit
Another variation today
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Rotary with a 120° V-bit
Liking it even better:)
COULD be Holy Heck on kneecaps/pantyhose/ and sanding though....cut quality LOOKS good Randall!!
You're having WAY to much FUN!!
scott
COULD be Holy Heck on kneecaps/pantyhose/ and sanding though....cut quality LOOKS good Randall!!
You're having WAY to much FUN!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Rotary with a 120° V-bit
I really don't see any need for sanding. These would probably look best painted since the poplar has some color variation, or possibly with a matte finish if you like the color variation.sanding though....cut quality LOOKS good
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- TReischl
- Vectric Wizard
- Posts: 4657
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Rotary with a 120° V-bit
With two of those, a couple of gears, and a frame a guy could build a meat tenderizer.
"If you see a good fight, get in it." Dr. Vernon Johns