Aztec and Mayan Calendar Theme Salad Bowl Guitar
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Aztec and Mayan Calendar Theme Salad Bowl Guitar
Hey, they are both round, so why not use them on another weird guitar build?
I used three of the symbols from the Mayan Haab calendar on the fret board for Vcarved decoration, and another one to decorate the tailpiece.
The bridge is sort of a pyramid also. The top and bottom panel are made of 3mm 5 ply aircraft grade plywood that I have used in building
radio control model aircraft over the years. The calendars are carved just 0.030" deep with a Whiteside #1540 60 degree carbide cutter. Both
panels are dark stained with General Finishes Java gel stain. The symbols on the fret board are stained with General Finishes black gel stain. The
red wood is Padauk, the brown layer under the fret board is black walnut. The neck is red oak. The bowl is an 11" diameter bamboo salad
bowl from IKEA. The tuners, fret wire, dual piezo pickup kit, skull knob, and strings are from C.B. Gitty Crafter Supply. 25" tuning length. Tuned to DGBE.
I finally upgraded my Aspire 8.5 software to v9.516 recently and used it to create this project.
CarveOne
I used three of the symbols from the Mayan Haab calendar on the fret board for Vcarved decoration, and another one to decorate the tailpiece.
The bridge is sort of a pyramid also. The top and bottom panel are made of 3mm 5 ply aircraft grade plywood that I have used in building
radio control model aircraft over the years. The calendars are carved just 0.030" deep with a Whiteside #1540 60 degree carbide cutter. Both
panels are dark stained with General Finishes Java gel stain. The symbols on the fret board are stained with General Finishes black gel stain. The
red wood is Padauk, the brown layer under the fret board is black walnut. The neck is red oak. The bowl is an 11" diameter bamboo salad
bowl from IKEA. The tuners, fret wire, dual piezo pickup kit, skull knob, and strings are from C.B. Gitty Crafter Supply. 25" tuning length. Tuned to DGBE.
I finally upgraded my Aspire 8.5 software to v9.516 recently and used it to create this project.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
You are making it difficult for me to not learn how to play one of those. It's another out of the ball park projects. Your family, friends and neighbors must have a wonderful time getting to see your projects much like we on this forum do. Thank you.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
You're making us look bad Richard!!
LIKING this one!
scott
LIKING this one!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Fantastic creativity, Richard! Who would have guessed anyone would make guitars out of those calendar designs?! Keeps us "out of our boxes" you do!
Thank you!
Thank you!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
If you can already play a 6 string acoustic guitar, just forget the two larger strings (EA) and figure out the chords from there. The remaining four strings are tuned the same as the four smaller strings on an acoustic guitar. (DGBE)Savannahdan wrote:You are making it difficult for me to not learn how to play one of those. It's another out of the ball park projects. Your family, friends and neighbors must have a wonderful time getting to see your projects much like we on this forum do. Thank you.
They all have something I made for them now. All of the women and great nieces in my close family have a Paradise Box and the great nieces and great nephews all have a guitar now. Good to get this guitar finished so that I can make a US Flag drop box for my American Legion post using steel sheet, plasma cutting, and MIG welding, then paint it. I also expect to go back to work nearly full time helping a friend build some equipment for a contract job he has coming up soon. It looks like it will last all summer, so I might not get anything done that I can post here for a while.
Why don't you guys try designing and making some weird guitars in my absence so I can watch?
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Isn't that what this forum is all about? Making each other want to do something to out-do each other?scottp55 wrote:You're making us look bad Richard!!
LIKING this one!
scott
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
It just proves that whatever we can dream up, we can make it happen with this wonderful Vectric Aspire software. Many thanks from me to the Vectric staff and to you also Michael for your inspiring projects.mtylerfl wrote:Fantastic creativity, Richard! Who would have guessed anyone would make guitars out of those calendar designs?! Keeps us "out of our boxes" you do!
Thank you!
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
This guitar has struck a nerve with the company that I buy my guitar parts from:
https://www.cbgitty.com/news/build-cbgs ... w-you-how/
There are three guitars that are featured. One that is a cigar box version of a Hurdy Gurdy instrument, mine, and another cigar box guitar.
CarveOne
https://www.cbgitty.com/news/build-cbgs ... w-you-how/
There are three guitars that are featured. One that is a cigar box version of a Hurdy Gurdy instrument, mine, and another cigar box guitar.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Very cool, Richard!!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Actually, there are five instruments being featured.
Michael, I think it's about time that you created a guitar of some kind for your Vectric Monthly Projects, don't you? I need some friendly competition here.
CarveOne
Michael, I think it's about time that you created a guitar of some kind for your Vectric Monthly Projects, don't you? I need some friendly competition here.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Congrats Richard!!!
Always a good feeling to have your work recognized!!
Well deserved!!
scott
Always a good feeling to have your work recognized!!
Well deserved!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Update:
This guitar is now on display at the local Roanoke Valley Veterans Museum along with three other guitars that I have made. This one and the license plate style guitar I made recently are on loan for most of the summer. They will demonstrate them to bus tours and school class tours that visit the museum.
CarveOne
This guitar is now on display at the local Roanoke Valley Veterans Museum along with three other guitars that I have made. This one and the license plate style guitar I made recently are on loan for most of the summer. They will demonstrate them to bus tours and school class tours that visit the museum.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Aztec and Mayan Calendar Theme Salad Bowl Guitar
Many thanks to the Vectric Ltd. company for choosing this project for one of the monthly email newsletter user links. Again.
My projects have slowed down for the summer, but as usual, but I hope to have more things to show off as I can get to them. One will be another salad bowl guitar, with yet another weird theme.
CarveOne
My projects have slowed down for the summer, but as usual, but I hope to have more things to show off as I can get to them. One will be another salad bowl guitar, with yet another weird theme.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com