Hello. I'm new to photo Vcarve. I only have the trial version as I am figuring out if its right for me. I'm having errors with my program though. Image size is 7.8" X 7.8" Z zero is from machine table (how i always do it in vcarve) material thickness is 1 inch. Cutting parameters im using a 30 degree engraving bit. It is tool number 8 in my tool changer and i have that set in my program but it keeps putting in tool 1 instead of 8. Also when it puts tool 1 in i get an error saying T1 197.14 (+X) e306. I'm sure you folks dont know what that means but maybe someone can give me some advice as how to better set this program up. I use Vcarve pro and aspire with no problems. The post processor is (AXYZ) .nc
Please find the attached post processor. Please copy the file to the "PostP" folder of PhotoVCarve trial edition.
This is usually located at "C\Program Files (x86)\PhotoVCarve Trial\PostP" (Assuming a 64 bit edition of Microsoft Windows).
Once you have copied the new post processor, exit the application and restart it. The new post processor will be labelled as "AXYZ A2MC (inch) (*.nc)" in the list of post processors. Please give this a try with your machine.