LinuxCNC rotary post

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
Allen
Posts: 26
Joined: Sat Oct 24, 2015 4:00 am
Model of CNC Machine: Built it myself/ Linuxcnc control

LinuxCNC rotary post

Post by Allen »

I was going to explore doing some rotary carving, I see there is no post for wrapping on LCNC.

Is this the end of my expedition?.......(If so, that didn't take long or go far).

I wonder if Mach3 or another post could be substituted?

Thanks in advance

AcBCDN
Vectric Apprentice
Posts: 66
Joined: Wed Jul 16, 2014 5:49 am
Model of CNC Machine: HomeBuilt

Re: LinuxCNC rotary post

Post by AcBCDN »


Allen
Posts: 26
Joined: Sat Oct 24, 2015 4:00 am
Model of CNC Machine: Built it myself/ Linuxcnc control

Re: LinuxCNC rotary post

Post by Allen »

Cool beans!!

I didn't think to search for EMC posts.
I'll see how this goes.

Thanks

Allen
Posts: 26
Joined: Sat Oct 24, 2015 4:00 am
Model of CNC Machine: Built it myself/ Linuxcnc control

Re: LinuxCNC rotary post

Post by Allen »

What is the file path for the PP's?

Allen
Posts: 26
Joined: Sat Oct 24, 2015 4:00 am
Model of CNC Machine: Built it myself/ Linuxcnc control

Re: LinuxCNC rotary post

Post by Allen »

Never mind I found them.

Post Reply