Machine not returning to work zero
-
- Vectric Craftsman
- Posts: 261
- Joined: Thu Jun 02, 2016 2:45 pm
- Model of CNC Machine: Home made/Linear rails/1605 Screw-drive
- Location: London UK
Machine not returning to work zero
I am using Vcarve desktop and Picsender, I have set up G28 to be my work zero and G28.1 to save it, I also Zero X/Y/Z in Picsender,, so I home the machine then G28 which takes me to work zero, then when the carve is finished it will not return to work zero, it is about 2" off zero in the X direction , it is ok in the Y direction, any help appreciated
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Machine not returning to work zero
As far as the VCarve side of things goes the XY home is set in the material setup part of the Toolpaths tab. Does that match with what you're setting the machine to via the G28 etc?
-
- Vectric Craftsman
- Posts: 261
- Joined: Thu Jun 02, 2016 2:45 pm
- Model of CNC Machine: Home made/Linear rails/1605 Screw-drive
- Location: London UK
Re: Machine not returning to work zero
Thank's Aidrian, yes they do match