Carving Acme thread on the inside of a split nut.
Carving Acme thread on the inside of a split nut.
I have been scratching my head trying to figure out how to model this in Vcarve. In the attached picture are images of the part I want to create. The part has a 5/8 x 4 tpi acme thread inside the cylinder. I am hoping someone can send me in the right direction to get this one done.
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Carving Acme thread on the inside of a split nut.
VCarve doesn't have the modeling capabilities for this. SolidWorks might be better suited for this type of modeling.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Craftsman
- Posts: 285
- Joined: Mon Dec 01, 2014 3:53 pm
- Model of CNC Machine: Homemade
Carving Acme thread on the inside of a split nut.
you may also want to consider bits with an ACME (or near ACME) profile - side cutter for the inside of the nuts, and end mills for threads on a 4th axis. E.g., https://www.carbideanddiamondtooling.co ... .Series.35 and https://www.whitneytool.com/Product.aspx?ID=5536 by way of examples.
- Leo
- Vectric Wizard
- Posts: 4084
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Carving Acme thread on the inside of a split nut.
Using the cutters that bobtail linked to is what you need.
You cannot model that in V-Carve or for that matter even in Aspire to my knowledge.
I think there is a threading gadget somewhere, but I don't know where.
I have never tried it, but I am pretty sure this would work.
It's a pretty easy combination of x-y motions Either G2 or G3 with a Z added in for the pitch.
It's not something in Vectric - it is straight G-Code.
I will play a little tonight on my machine.
You cannot model that in V-Carve or for that matter even in Aspire to my knowledge.
I think there is a threading gadget somewhere, but I don't know where.
I have never tried it, but I am pretty sure this would work.
It's a pretty easy combination of x-y motions Either G2 or G3 with a Z added in for the pitch.
It's not something in Vectric - it is straight G-Code.
I will play a little tonight on my machine.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Craftsman
- Posts: 285
- Joined: Mon Dec 01, 2014 3:53 pm
- Model of CNC Machine: Homemade
Carving Acme thread on the inside of a split nut.
Also, Paul Rowntree's gadget works for the internal threads, and for short (at least with the z capacity on my machine) external threads. On this forum generally there are comments on threading using rotary, if memory serves one such author was/is Ger21. And the method was simple g-code in Mach3.