I have ordered a laser module for my Piranha CNC. Does anybody have any advice, tips, do's & don't's, etc. that they can share before I start using it?
Thanks.
Laser Module Tips?
-
- Vectric Craftsman
- Posts: 136
- Joined: Fri Jan 03, 2014 1:00 am
- Model of CNC Machine: Home built aluminum and steel 3 X 4 CNC
- Location: Charlotte, NC
Re: Laser Module Tips?
Buy some laser safety glasses and use them any time that laser is used...better yet, get 2 or 3 so if you have visitors they are protected also.
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Laser Module Tips?
Make a sign for the shop that reads:
Do NOT stare directly at the laser
with the remaining good eye
Do NOT stare directly at the laser
with the remaining good eye
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Laser Module Tips?
Good one!!!! Two Eyes In Two Eyes Out Another Good Day On the Laser..... Have always loved your signature Randall.Rcnewcomb wrote:Make a sign for the shop that reads:
Do NOT stare directly at the laser
with the remaining good eye
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli