Thanks for the file, I have a granddaughter project that it will be used in.
Dan
Basket weave
-
- Vectric Apprentice
- Posts: 66
- Joined: Mon Sep 10, 2018 3:21 pm
- Model of CNC Machine: cncrouterparts
Re: Basket weave
Sorry to persist but I am so new. Can you please show me how to start a project 12" x 12" .
And then how to use extrude and weave to create what i"m looking to accomplish
I would be so grateful.
thanks to all
And then how to use extrude and weave to create what i"m looking to accomplish
I would be so grateful.
thanks to all
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Basket weave
Hi,lavon wrote:Sorry to persist but I am so new. Can you please show me how to start a project 12" x 12" .
And then how to use extrude and weave to create what i"m looking to accomplish
I would be so grateful.
thanks to all
Here's everything you need to know regarding how to do weaves:
https://support.vectric.com/tutorials/V ... arks=weave
After you watch the video and go through the steps yourself, if you still have questions - let us know!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Apprentice
- Posts: 66
- Joined: Mon Sep 10, 2018 3:21 pm
- Model of CNC Machine: cncrouterparts
Re: Basket weave
to mtylerfl:
I'm getting conflicting advice. Use a component, don't use a component. one from Vectric support.
Sorry to persist but I am so new. please show me how to start a project 12" x 12" from scratch and finish the project to achieve
the results. I don't know how to even start! Your advice seemed the best.
Vectric support says: "your example you have a layout that is only weaving on the horizontal bars."
this does't sound right. I want ALL bars to be the same. Again with ALL bars against each other( I'm sure you already know what I mean)
THANK YOU, Mike
I'm getting conflicting advice. Use a component, don't use a component. one from Vectric support.
Sorry to persist but I am so new. please show me how to start a project 12" x 12" from scratch and finish the project to achieve
the results. I don't know how to even start! Your advice seemed the best.
Vectric support says: "your example you have a layout that is only weaving on the horizontal bars."
this does't sound right. I want ALL bars to be the same. Again with ALL bars against each other( I'm sure you already know what I mean)
THANK YOU, Mike
- TReischl
- Vectric Wizard
- Posts: 4596
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Basket weave
Lavon, you should really take a look at the tutorials for doing basket weaves.
https://support.vectric.com/tutorials/V ... ideo_id=67
This forum is a good place to get advice but you really can't expect someone to tutor you through a complete project. Once you get started a lot of things will become much clearer and then you might have some questions about specific features.
https://support.vectric.com/tutorials/V ... ideo_id=67
This forum is a good place to get advice but you really can't expect someone to tutor you through a complete project. Once you get started a lot of things will become much clearer and then you might have some questions about specific features.
"If you see a good fight, get in it." Dr. Vernon Johns