Make a snake
-
- Vectric Craftsman
- Posts: 156
- Joined: Wed May 09, 2007 9:27 pm
- Model of CNC Machine: Shopbot
- Location: Austin, Texas
- Contact:
Make a snake
Can someone chime in with their ideas for designing and cutting a snake like this. It will be about 20 to 24 inches.
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Make a snake
Buy the Rod of Asclepius clipart from Design and Make. I cut this for a physician about 3 months ago.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Make a snake
The other day I was playing around with Aspire's Clipart by merging and copying it to the other side and doing a double-sided, weird looking walking stick. Also, years ago, I did a walking stick using Aspire's Clipart but modeled it in Rhino and use the Rotary to cut it, but something like that could also be made doing the double-sided project.
Gary
Gary
-
- Vectric Craftsman
- Posts: 156
- Joined: Wed May 09, 2007 9:27 pm
- Model of CNC Machine: Shopbot
- Location: Austin, Texas
- Contact:
Re: Make a snake
I need to make an actual shaft with the snake to function as a ceremonial mace.
- jarm2
- Vectric Craftsman
- Posts: 246
- Joined: Wed Jun 13, 2012 9:16 pm
- Model of CNC Machine: C&CNC electronics 4x4 ext aluminum table
- Location: Harpster, Idaho
Re: Make a snake
This is a version of the Veterinary Symbol I designed to carve for a local veterinarian(sp). I never did carve it, but plan to one of these days.
Aspire 11 ViaCAD Pro 12 Corel 2019 W 10, 2.2 kw spindle wireless pendant
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Make a snake
Model the snake and the stick separately.I need to make an actual shaft with the snake to function as a ceremonial mace.
Then snipe and tilt the snake model where you want it to appear to go behind the stick
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Make a snake
CG Trader has a 3-D model for $9.00. You can do a double-sided project with it to make a ceremonial mace. http://www.cgtrader.com/3d-print-models ... rint-model. Or you can do what Randall suggested and then copy the object to the other side and do it as a double-sided project.
Gary
Gary