Round Chair, copy of Hans Wegner's classic chair
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Round Chair, copy of Hans Wegner's classic chair
Oh wow Russel this is fantastic! Love the design, very inspiring! Thank you for Sharing
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
- rscrawford
- Vectric Wizard
- Posts: 1104
- Joined: Mon Jan 17, 2011 6:49 pm
- Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
- Location: Wetaskiwin, Alberta
- Contact:
Re: Round Chair, copy of Hans Wegner's classic chair
Thanks guys. This was a fun project. Not extremely hard to model or cut out, but very hard to figure out the various angles and lengths because I didn't model the chair in any true 3D program. This was designed entirely from some 2D sketchups in Aspire.
Russell Crawford
http://www.cherryleaf-rustle.com
http://www.cherryleaf-rustle.com
-
- Vectric Craftsman
- Posts: 128
- Joined: Tue Feb 14, 2012 5:26 am
- Model of CNC Machine: Roland MDX-40A
- Location: Lake Barrington, IL
- Contact:
Re: Round Chair, copy of Hans Wegner's classic chair
Fantastic. Thanks, Russell, for sharing your process and beautiful results.
Bob Armbruster
www.ArmbrusterCo.com
www.ArmbrusterCo.com
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
Re: Round Chair, copy of Hans Wegner's classic chair
excellent Russel, i love how you use jigs to get the cnc to do what you want
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn
- rscrawford
- Vectric Wizard
- Posts: 1104
- Joined: Mon Jan 17, 2011 6:49 pm
- Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
- Location: Wetaskiwin, Alberta
- Contact:
Re: Round Chair, copy of Hans Wegner's classic chair
Here is a completed chair in butternut, with leather upholstery. Changed the dimensions and angles slightly on this chair to make it more comfortable.
Russell Crawford
http://www.cherryleaf-rustle.com
http://www.cherryleaf-rustle.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Round Chair, copy of Hans Wegner's classic chair
ELEGANT Russell!!!
Can't think of a higher complement
It BLENDS!
scott
Can't think of a higher complement
It BLENDS!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Round Chair, copy of Hans Wegner's classic chair
My jaw is still on the floor. Fantastic work!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Round Chair, copy of Hans Wegner's classic chair
+1mtylerfl wrote:My jaw is still on the floor. Fantastic work!
Michael, when you get round to picking your jaw up can you do mine at the same time please
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: Round Chair, copy of Hans Wegner's classic chair
Russell
You would have made Hans proud any time.
Had the CNC machine been available in his time, I am convinced he would have used it.
He was never afraid of trying something different.
Very very well done
You would have made Hans proud any time.
Had the CNC machine been available in his time, I am convinced he would have used it.
He was never afraid of trying something different.
Very very well done
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- Jim_in_PA
- Vectric Craftsman
- Posts: 278
- Joined: Wed Jan 10, 2018 3:24 am
- Model of CNC Machine: Camaster Stinger II SR-44 (MacOS user)
Re: Round Chair, copy of Hans Wegner's classic chair
Wow....outstanding in every way!