UCCNC Post Processor for PhotoVcarve

This forum is for general discussion about PhotoVCarve.

UCCNC Post Processor for PhotoVcarve

Postby mark@dec4.co.uk » Thu Jan 03, 2019 6:19 am

Please can you tell me how to load the correct post processor for UCCNC on PhotoVcarve - thanks
mark@dec4.co.uk
 
Posts: 1
Joined: Tue Nov 21, 2017 6:06 pm
Model of CNC Machine: Stepcraft 840

Re: UCCNC Post Processor for PhotoVcarve

Postby Greolt » Thu Jan 03, 2019 7:46 am

When saving a toolpath in PhotoVcarve there is a drop down list above the "Save Toolpath" button

In this list select G Code Inch(*.tap) (or MM if needed)

I tested here and there is nothing in the code that UCCNC objects to. It produces bare bones Gcode

The question will be if your machine needs commands to start the spindle ETC.

Then you may need to dig a little deeper or edit your own Post Processor.

If you post a sample of Gcode that you have been running we can take a look for anything extra you will need in a PP.
Greolt
Vectric Wizard
 
Posts: 908
Joined: Fri Sep 21, 2007 1:44 pm
Location: Australia
Model of CNC Machine: 900 x 750 2hp Mach3 Router & others

Re: UCCNC Post Processor for PhotoVcarve

Postby Greolt » Thu Jan 03, 2019 8:23 am

Mark

Here is a PP to try

Vectric provide a PP for "Stepcraft UCCNC" in Aspire

I have taken that PP and removed everything that PhotoVcarve does not use and things that UCCNC objects to.

I have bench tested here but please be safe and test in the air before committing material and cutter.

PP file will need to be placed in the "PostP" folder in the PhotoVcarve directory. Restart PhotoVcarve.


EDIT: I am surprised that the PP supposedly for UCCNC had so many things that UCCNC objected to.
Attachments
Stepcraft_UCCNC_mm.pp
(2.08 KiB) Downloaded 100 times
Greolt
Vectric Wizard
 
Posts: 908
Joined: Fri Sep 21, 2007 1:44 pm
Location: Australia
Model of CNC Machine: 900 x 750 2hp Mach3 Router & others

Re: UCCNC Post Processor for PhotoVcarve

Postby martin54 » Sun Jan 20, 2019 1:17 am

There is a forum for UCCNC, might be worth asking on there as well :lol: :lol:

https://www.forum.cncdrive.com/index.php
User avatar
martin54
Vectric Wizard
 
Posts: 4569
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)


Return to PhotoVCarve - General

Who is online

Users browsing this forum: No registered users and 3 guests