Croping a Photo
Croping a Photo
I have a picture of my brothers cat that I want to
engrave on some plexiglass.
I have used paint.net and cropped the picture to the outline
I want. However I can not for the life of me get the white
background trimmed from the outside of the cats face.
I know it can be done, but I'm stumped.
I have photo Vcarve, VcarvePro, Microsoft paint, and
paint.net.
I sure could use a nudge.
Thanks for any help!
olf20 / Bob
engrave on some plexiglass.
I have used paint.net and cropped the picture to the outline
I want. However I can not for the life of me get the white
background trimmed from the outside of the cats face.
I know it can be done, but I'm stumped.
I have photo Vcarve, VcarvePro, Microsoft paint, and
paint.net.
I sure could use a nudge.
Thanks for any help!
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Croping a Photo
In Paint.net the tool you're looking for is the "magic wand" 4th down on left column of tool tray. Here's a very short video on using it.
John
Maker of Chips
Maker of Chips
Re: Croping a Photo
Thanks Highpockets, I got that far but must be missing a step
afterwards.
Attached is a copy of the picture after paint.net
I need just the cats face.
olf20 / Bob
afterwards.
Attached is a copy of the picture after paint.net
I need just the cats face.
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Croping a Photo
I'm not sure what your showing me, but the problem is when
I go to engrave the face it engraves a square with the face in
it. I just want the face. Is that a mask?
Hope I'm explaining this right.
Thanks for your replies!!
olf20 / Bob
I go to engrave the face it engraves a square with the face in
it. I just want the face. Is that a mask?
Hope I'm explaining this right.
Thanks for your replies!!
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Croping a Photo
Try this one. It's in .png format and available as a jpeg if you need it. I used Photoshop. Not sure how it could be done in Paint.net
Steve
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Croping a Photo
You need to save in .png format to preserve the transparent background.
Gerry - http://www.thecncwoodworker.com
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Croping a Photo
Bob, sort if I was confused the issue. The green is just a layer to show the head more clearly with a transparent background. I believe the problem your having is because the background on your photo is white and not transparent. Gerry is also correct, you need to be saving the image in a file format that supports transparency (tif, png ...) . I usually use .png.
John
Maker of Chips
Maker of Chips
-
- Vectric Craftsman
- Posts: 159
- Joined: Wed May 09, 2007 9:27 pm
- Model of CNC Machine: Shopbot
- Location: Austin, Texas
- Contact:
Re: Croping a Photo
Why can't you just use the trace bitmap tool and then use that to tool path inside vectors.
Re: Croping a Photo
Thanks everyone. I'll try the trace idea. I had thought of that
but thought it could be done in one of the photo programs.
Thanks Gerry for the tip on .png
olf20 / Bob
but thought it could be done in one of the photo programs.
Thanks Gerry for the tip on .png
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Croping a Photo
Not liking the odds of it looking recognizable in plexi, post back your results when able.
Doug
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Croping a Photo
+1 to what Doug has said
Just as additional information, not only does jpeg not support transparencies it is really the worst file format to use for this sort of work. It does a good job of compressing files which gives a smaller file size, thats why it is so popular on the internet where file size is quite important BUT in order to get the smaller file size a lot of the colour info is discarded. For viewing on the internet that discarded info is not needed but for printing & work like this that extra info can make all the difference to the final quality
Just as additional information, not only does jpeg not support transparencies it is really the worst file format to use for this sort of work. It does a good job of compressing files which gives a smaller file size, thats why it is so popular on the internet where file size is quite important BUT in order to get the smaller file size a lot of the colour info is discarded. For viewing on the internet that discarded info is not needed but for printing & work like this that extra info can make all the difference to the final quality
Re: Croping a Photo
I'll try a cut on Saturday.
Martin - when going to BW does it matter if the full
quality if the color is there?? Just asking as I don't know.
Thanks
olf20 / Bob
Martin - when going to BW does it matter if the full
quality if the color is there?? Just asking as I don't know.
Thanks
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Croping a Photo
I don't have any personal experiences, to be honest I have never converted anything to black & white, if I am converting colour then I have always converted to greyscale, I have never even tried the B&W options in photo editing software out of curiosiy my gut tells me that B&W is not going to give you the best results for something like this.
Re: Croping a Photo
I tried a couple of attempts on some scrap.
Did not turn out. Funny how my mind thinks of
things that I can not do. LOL
Thanks for the suggestions.
olf20 / Bob
Did not turn out. Funny how my mind thinks of
things that I can not do. LOL
Thanks for the suggestions.
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys