Gravograph Compatibility

This section is for useful tips and tricks for Aspire

Gravograph Compatibility

Postby DougN » Tue Jan 01, 2019 3:07 pm

I have recently acquired a used Gravograph M40. The software for this is primal at best. After numerous attempts contacting Gravograph and their so-called representative for the last two months I have not received any acknowledgement at all. In all fairness I have found their tech support to be excellent.

Running Aspire, I have noticed drivers for other Gravograph equipment. To use Aspire for the M40 would be great. Any drivers for the M40 machine?

Thanks in advance.
DougN
Vectric Apprentice
 
Posts: 4
Joined: Sun May 14, 2017 2:33 pm
Model of CNC Machine: Stepcraft 840

Re: Gravograph Compatibility

Postby Adrian » Tue Jan 01, 2019 3:50 pm

As long as the control software is the same as the other models the Gravograph drivers should work I would think. It's not the hardware that the output from the Vectric software operates with it's the control software.
User avatar
Adrian
Vectric Archimage
 
Posts: 9718
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Gravograph Compatibility

Postby DougN » Tue Jan 01, 2019 9:03 pm

I'll have to play with it for a bit. Thanks for the reply.
DougN
Vectric Apprentice
 
Posts: 4
Joined: Sun May 14, 2017 2:33 pm
Model of CNC Machine: Stepcraft 840


Return to Aspire - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 2 guests