Used some models from Design and Make to make a couple of rosettes for our fireplace. Eventually they will attach to the new fireplace mantel I'm working on.
Fireplace rosettes
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Fireplace rosettes
John
Maker of Chips
Maker of Chips
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Fireplace rosettes
Great work on the paint! They look great, just in time for Christmas!
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Fireplace rosettes
Hard to tell which is the first one:)
Good job John!!
scott
Good job John!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Fireplace rosettes
Hello I realize this post is fairly old. But if anyone on here has rhese files for the cribbage board and could possible. Forward them to me or the original post still has them and could send would be great I like the #1deer scene and the one that says add your name here the most but I would be willing to look at any cribbage file as I would like to make a couple boards
Thanks in advance
Email is rick-turner@shaw.ca
Thanks in advance
Email is rick-turner@shaw.ca
- Bob Jr
- Vectric Wizard
- Posts: 463
- Joined: Thu Aug 13, 2009 2:13 am
- Model of CNC Machine: Axiom, Shark
Re: Fireplace rosettes
Rick,Rick-T wrote:Hello I realize this post is fairly old. But if anyone on here has rhese files for the cribbage board and could possible. Forward them to me or the original post still has them and could send would be great I like the #1deer scene and the one that says add your name here the most but I would be willing to look at any cribbage file as I would like to make a couple boards
Thanks in advance
Email is rick-turner@shaw.ca
You should probably go here: http://forum.vectric.com/viewtopic.php? ... t=cribbage
"Be accurate."
W. Tell
W. Tell