I've had a couple rotary projects now where all of a sudden a toolpath will no longer calculate. I click on calculate and nothing happens. No error message, no toolpath generated. Nothing happens. But if I then click on "recalculate all toolpaths", the toolpath will calculate just fine. But it still won't calculate from the calculate button in the toolpath. It's the vcarve toolpath that I've been noticing it on. I don't have a file that I can post at this time. When I get a chance I'll see if I can duplicate it in a file I can post. But for now I'm just wondering if anyone else is seeing this behavior.
Ed
Balky Rotary Calc
-
- Vectric Wizard
- Posts: 338
- Joined: Wed Aug 12, 2009 2:09 am
- Model of CNC Machine: Taig Mill and Self Built Routers
- Location: Space Coast, Florida
-
- Vectric Wizard
- Posts: 338
- Joined: Wed Aug 12, 2009 2:09 am
- Model of CNC Machine: Taig Mill and Self Built Routers
- Location: Space Coast, Florida
Re: Balky Rotary Calc
I've attached a simple rotary project with a toolpath that will not calculate. Everything was fine until I previewed the toolpath. Once I previewed it I could no longer calculate it from within the toolpath. But if I use Recalc all toolpaths it calculates. Really weird. Anyone feel like giving it a try to see if it's just my installation / machine?
Ed
Ed
- Attachments
-
- Balky_Calc.crv3d
- (30 KiB) Downloaded 109 times
-
- Vectric Wizard
- Posts: 338
- Joined: Wed Aug 12, 2009 2:09 am
- Model of CNC Machine: Taig Mill and Self Built Routers
- Location: Space Coast, Florida
Re: Balky Rotary Calc
After some more playing around, it appears that it does recalculate. It just stops showing the toolpath in 2d view when I recalculate after having done a preview. Now I know that I have to manually turn on 2D toolpaths each time I recalculate once I've done a preview. Or I could use recalc all toolpaths, but that gets less attractive as the number of toolpaths increases.
Ed
Ed
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Balky Rotary Calc
I observed the same thing, Ed. Seemed to recalc alright, but the 2D view didn't show the toolpath selected as when Recalc All Toolpaths does.spinningwood wrote:After some more playing around, it appears that it does recalculate. It just stops showing the toolpath in 2d view when I recalculate after having done a preview. Now I know that I have to manually turn on 2D toolpaths each time I recalculate once I've done a preview. Or I could use recalc all toolpaths, but that gets less attractive as the number of toolpaths increases.
Ed
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 338
- Joined: Wed Aug 12, 2009 2:09 am
- Model of CNC Machine: Taig Mill and Self Built Routers
- Location: Space Coast, Florida
Re: Balky Rotary Calc
Thanks Michael - I feel better knowing it's not just me.
Ed
Ed