First lithophane

Post by **Greasetattoo** » Fri Jul 18, 2008 4:18 pm

Well, here is my first attempt at a lithophane.
I did it on my Sherline converted Mill.

I used a .125 ball nose for the roughing
I used a .0625 Beckwith ball nose for the finishing.

Enjoy....gotta go make another...

I am going to make the frame next...

Post by **Khalid** » Fri Jul 18, 2008 6:44 pm

Very good and neat work u did:)..How long it took to complete the machining ?..What IPM u used?...I also want to do such lithoplanes but currently i dont have resources..

Please post the complete litho with frame when completed..

Regards

Post by **js11110** » Fri Jul 18, 2008 7:33 pm

Grease-

Addicting, isn't it? You were warned!!

Great job!!

Jason

Post by **crocky** » Sat Jul 19, 2008 3:05 am

That is pretty darn good

The addiction starts

you only have to get better at it

Post by **Greasetattoo** » Wed Jul 30, 2008 1:08 am

Yet, another...

Frames coming next....

My father in 1946'.

Post by **Greasetattoo** » Wed Jul 30, 2008 1:22 am

Frame, something like this.

Will hang on window.
Suction cups.

Will post when I complete them..

Post by **Greasetattoo** » Wed Jul 30, 2008 1:38 am

Prototype number one..

Still needs a clear coat and the hanger.

It is 2 halves.
The litho is sandwiched between them.

Post by **lovebugjunkie** » Wed Jul 30, 2008 2:55 am

Like your frame ideas, nice job.