looking for a boat model

This forum is for general discussion about Aspire
Post Reply
User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

looking for a boat model

Post by sawmiller »

hey folks,
i have a customer that wants a carving in his mantel of a wooden speedboat, specifically a chris craft wood boat. has anyone seen a model that would be a good starting point ?
i have seen somewheres , a 3d boat pulling a skier, but cant remember where.
thanks for reading.
dan
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

User avatar
mfirlott
Vectric Craftsman
Posts: 299
Joined: Thu Feb 07, 2013 12:49 am
Model of CNC Machine: Stinger 1 (2014)
Location: Cantley, Quebec, Canada
Contact:

Re: looking for a boat model

Post by mfirlott »

Have you tried a search of Thingiverse.com? Here's one. There were many with a "speed boat" search that came up.

https://www.thingiverse.com/thing:1752110/files
(Mitch)
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser

User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: looking for a boat model

Post by sawmiller »

Interesting, still would have to make the wake, but irs a start
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: looking for a boat model

Post by martin54 »

sawmiller wrote:Interesting, still would have to make the wake, but irs a start
Thats why you bought Aspire rather than a lower cost software like vcarve pro :lol: :lol: :lol:

Haven't had a search but have you tried all the usual places ? Design & Make, turbosquid, grabcad, 3dmodel club, yegi, thingiverse to name a few :lol: :lol:

User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: looking for a boat model

Post by sawmiller »

37173080_1979236238755752_3770205563254734848_n.jpg
ended up modding a boat model off thingverse...
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

Post Reply