Games of Thrones Clock

This forum is for general discussion about Aspire
Post Reply
Old_Wolf
Posts: 5
Joined: Wed Apr 01, 2015 3:30 am
Model of CNC Machine: Professor HDX

Games of Thrones Clock

Post by Old_Wolf »

I trying to run this file. however, each time I run the file, about 50% into the run, the z height rises to a height that does not meet the material. any thoughts?
game of thrones clock.jpg

User avatar
Adrian
Vectric Archimage
Posts: 14541
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Games of Thrones Clock

Post by Adrian »

What does the preview show in that area?

ger21
Vectric Wizard
Posts: 1592
Joined: Sun Sep 16, 2007 2:59 pm
Model of CNC Machine: Custom DIY
Location: Lake St Clair, MI, USA
Contact:

Re: Games of Thrones Clock

Post by ger21 »

That usually happens when the machine loses steps, and thus, loses position.
Gerry - http://www.thecncwoodworker.com

CarveOne
Vectric Wizard
Posts: 1479
Joined: Sun Nov 28, 2010 5:10 pm
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
Location: Eastern NC, USA

Re: Games of Thrones Clock

Post by CarveOne »

The model appears to have something in the upper right quadrant between XII, I, II, and III that might be "spikes". Roll the model over in Preview to see what that stuff is, and how high it is relative to the numerals. You might need to use a zero plane to limit how high they are if it is what I think it is.

CarveOne
CarveOne
http://www.carveonecncwoodcraft.com

ctbjdm
Vectric Apprentice
Posts: 86
Joined: Sat May 13, 2017 11:45 pm
Model of CNC Machine: TBD

Re: Games of Thrones Clock

Post by ctbjdm »

That’s a neat model - is that available somewhere?

frank taylor
Vectric Apprentice
Posts: 63
Joined: Mon Sep 19, 2016 8:45 am
Model of CNC Machine: bravoprodigy be3030

Re: Games of Thrones Clock

Post by frank taylor »

it looks like the clock is in the wrong place it should be down lower in the circle can you share the model

frank taylor
Vectric Apprentice
Posts: 63
Joined: Mon Sep 19, 2016 8:45 am
Model of CNC Machine: bravoprodigy be3030

Re: Games of Thrones Clock

Post by frank taylor »

another thought the clock maybe on another layer check your layers and turn of the clock layer

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Games of Thrones Clock

Post by martin54 »

Bound to be some sort of copyright on something like that so probably not a good idea to try sharing it, having said that there seem to be plenty of people selling it for next to nothing if you look in the usual places :lol: :lol:

Post Reply