Proto-type Gumball Machine

An area to upload images of pieces cut using VCarve Pro
User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Proto-type Gumball Machine

Post by sharkcutup »

20180522_170555.jpg
Proto-Type Gumball Machine


Needs a little tweaking --- Ramp is too steep sometimes Gumball bypasses the mark! --- Also need to look into gumball sizes because the small gumballs drop two at a time causing the gear to jam.

But overall not a bad proto-type gumball machine!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Proto-type Gumball Machine

Post by highpockets »

Looks great can't wait to see the finished project.

Thanks for sharing....
John
Maker of Chips

lsvien
Vectric Craftsman
Posts: 125
Joined: Wed Jan 04, 2012 3:50 pm
Model of CNC Machine: Shark
Location: MN

Re: Proto-type Gumball Machine

Post by lsvien »

Once you have it working, want to share your file?

Thanks

Lawrence
Mother Nature always bats last!

User avatar
watsonswords
Posts: 23
Joined: Tue Jul 09, 2013 5:01 am
Model of CNC Machine: PDJ Pilot Pro
Location: Bonney Lake, WA USA
Contact:

Re: Proto-type Gumball Machine

Post by watsonswords »

Looks awesome so far! Looking forward to the finished product.
Tom Watson www.signsinwood.com

JoeinWestMich
Vectric Apprentice
Posts: 62
Joined: Sun Mar 17, 2013 7:48 pm
Model of CNC Machine: ShopBot Buddy 48T PRS alpha HSD 2.2HP
Location: Fruitport, MI

Re: Proto-type Gumball Machine

Post by JoeinWestMich »

Keep up the tweaking. Please post the final working model. We "old" gumball lovers are eagerly awaiting the final workings!

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Proto-type Gumball Machine

Post by sharkcutup »

Just got finished this morning making some minor adjustments to the proto-type Gumball Machine.

Here are some of the things I adjusted and/or changed.

1.) Reduced gears from 3/4" thickness to 1/2" (Holes in inner part of gears for gumballs were allowing two gumballs to drop at a time causing the gear to jam against jar lid)
2.) Cut down top support board from 3/4" to 1/2" plus a little to match gear sizes and allow a little gap for ease of movement of gears.
3.) Cut dowel supports for top board to size.
4.) It was too late for the proto-type but on the production model I am lowering the ramp on the ramp board so the gumball doesn't travel so fast to the pit.

Note: You probably could use this gumball machine for Jelly Beans, M&M's or Skittles just have to make necessary sizing adjustments on the inner holes of the big gear.

After making the necessary adjustments the proto-type gumball machine functions flawlessly!!! Now on with some production models!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: Proto-type Gumball Machine

Post by RebeccaJ »

This is pretty neat! Thanks for sharing this with the world!
You'll have to create a video of the finished part in action so we can all see! :)
Beki
Senior Application Engineer - Vectric Ltd.

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Proto-type Gumball Machine

Post by sharkcutup »

WOW! This is truly an honor to have a project recognized by a Senior Application Engineer from Vectric, Ltd.

Unfortunately, I cannot take full credit for the original design for it was created by another individual. I had found the photo of the gumball machine on the internet and took the time to draw it out into V-Carve Pro v8.5. But I will say that it was amazing how easy V-Carve makes the design drawing and tool path process. In fact, I believe that it may be time for me to finally make that bold monumental jump to V-Carve V9.

Rebecca Thank you for your kind words!!

I will have to set aside some time in my busy schedule to create a short video of the gumball machine in action to post on You-Tube with link to it here on this thread.

Everyone Have a Great Day!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

ctbjdm
Vectric Apprentice
Posts: 86
Joined: Sat May 13, 2017 11:45 pm
Model of CNC Machine: TBD

Re: Proto-type Gumball Machine

Post by ctbjdm »

This looks great @sharkcutup! I showed my kids and they now want me to make one! Are you planning on sharing your design?

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Proto-type Gumball Machine

Post by sharkcutup »

This looks great @sharkcutup! I showed my kids and they now want me to make one! Are you planning on sharing your design?
I guess now I will have to go into the file and create it in a way for everyone to understand and post it here on this thread! The answer is yes in time I will see that it gets posted.

In my one of my previous posts I said I had made adjustments to the gear thickness sizes and the gear area support board. After researching gumballs I have found that there are various sizes of gumballs out there on the market. In knowing this you could actually create the gumball machine from all the same size material and purchase the gumballs to size to match the machine. I had no idea that the gumballs come in so many different sizes!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

ctbjdm
Vectric Apprentice
Posts: 86
Joined: Sat May 13, 2017 11:45 pm
Model of CNC Machine: TBD

Re: Proto-type Gumball Machine

Post by ctbjdm »

Thank you! I’d be happy to contribute to your gumball fund for your efforts...

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Proto-type Gumball Machine

Post by sharkcutup »

Thank you! I’d be happy to contribute to your gumball fund for your efforts...
With my six grandsons all wanting gumball machine the contributions would definitely be appreciated!!!

I will keep you posted here on this thread when I have the file ready.

Thank You!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Proto-type Gumball Machine

Post by sharkcutup »

Thank you! I’d be happy to contribute to your gumball fund for your efforts...
Check out my NEW Website (http://www.hoganscnccrafts.com) which is under construction the gumball machine files are there with the featured products. Be sure to browse around the website a little! Just remember to be patient and to be aware that I am adding to this website daily until I am satisfied with it.

If you have any problems (cause site is NEW) be sure to leave a message on this thread and I will look into it.

Thank You for your Interest!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

ctbjdm
Vectric Apprentice
Posts: 86
Joined: Sat May 13, 2017 11:45 pm
Model of CNC Machine: TBD

Re: Proto-type Gumball Machine

Post by ctbjdm »

Sent - thank you! Will let you know how it turns out and provide any feedback. May be a few weeks, have some paying projects first.

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Proto-type Gumball Machine

Post by sharkcutup »

ctbjdm,

Thank You for your Generous contribution/donation. It will definitely satisfy my grandsons appetite for gumballs!!!

Have a GREAT DAY!!!

Sharkcutp
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

Post Reply