Navy Seal

This forum is for general discussion regarding VCarve Pro
Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Navy Seal

Post by Ken Tipton »

Can anyone direct me where I can get a Navy Seal (Paid or free) I would like to cut it out 3d with the outside words United States Navy v carved. So I would like the outside rope border and the middle insignia to be 3d carved and the lettering to be v-carved.

Thank You
Ken

User avatar
adze_cnc
Vectric Wizard
Posts: 4325
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Navy Seal

Post by adze_cnc »

Would the Navy Seal like to be cut? He or she might not complain---training and all that---but I expect they wouldn't be half pleased... :D

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Navy Seal

Post by martin54 »

Have you tried a search on the forum Ken, sure there have been a few posts about Military plaques & crests some with links to where they can be found, not sure if what you are looking for has been mentioned though :lol: :lol:

Pete Cyr
Vectric Craftsman
Posts: 240
Joined: Sun May 15, 2011 4:19 pm
Model of CNC Machine: Camaster Stinger II

Re: Navy Seal

Post by Pete Cyr »


Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Re: Navy Seal

Post by Ken Tipton »

I saw the one and Design and Make but that is not the Seal I am looking for. I will have to keep looking

Pete Cyr
Vectric Craftsman
Posts: 240
Joined: Sun May 15, 2011 4:19 pm
Model of CNC Machine: Camaster Stinger II

Re: Navy Seal

Post by Pete Cyr »

Do you have a picture of the one you are looking for?

Trock

Re: Navy Seal

Post by Trock »


Trock

Re: Navy Seal

Post by Trock »

Sorry, typical government change...

https://www.defense.gov/About/Military- ... ice-Seals/

Bill_L
Vectric Craftsman
Posts: 142
Joined: Tue Jan 24, 2006 11:57 am
Model of CNC Machine: ShopBot PRS Alpha
Location: Imperial, PA USA

Re: Navy Seal

Post by Bill_L »

Here are the vectors for everything that you will need outside of the 3D relief. That you will have to buy from the Design and Make site.

Bill
Attachments
Navy Seal Vectors.eps
(152.46 KiB) Downloaded 287 times

Stephen50
Vectric Craftsman
Posts: 170
Joined: Sun Jul 28, 2013 9:09 pm
Model of CNC Machine: Shopbot Desktop

Re: Navy Seal

Post by Stephen50 »

Another potential source cncmilitaryemblems.com. If you can't find what your looking for send an email they could design one for you. I did that for a few USAF units I was looking for the end product looked great.

Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Re: Navy Seal

Post by Ken Tipton »

this is the logo i am looking for

https://www.alsarmynavy.com/prodimages/ ... l.jpg?vm=r

didn't see this one on Design and Make

Ken

User avatar
adze_cnc
Vectric Wizard
Posts: 4325
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Navy Seal

Post by adze_cnc »

I looked at those files available on Deisgn & Make and they all sort of look like the US Navy emblem but not quite. I expect the reason is a matter of licensing: http://www.navy.mil/trademarks/licensing.html

Bill_L
Vectric Craftsman
Posts: 142
Joined: Tue Jan 24, 2006 11:57 am
Model of CNC Machine: ShopBot PRS Alpha
Location: Imperial, PA USA

Re: Navy Seal

Post by Bill_L »

Well, while I was in the Navy this is what it was.

https://commons.wikimedia.org/wiki/File ... e_Navy.svg
Attachments
600px-Seal_of_the_United_States_Department_of_the_Navy.svg.png

User avatar
dhellew2
Vectric Wizard
Posts: 1322
Joined: Thu May 22, 2008 10:14 pm
Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
Location: Royal City Washington

Re: Navy Seal

Post by dhellew2 »

You could use the design and make file then add your own text
;us navy 3d.jpg
This is the patch I use on my hats
US NAVY VETERAN.jpg
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale

Pete Cyr
Vectric Craftsman
Posts: 240
Joined: Sun May 15, 2011 4:19 pm
Model of CNC Machine: Camaster Stinger II

Re: Navy Seal

Post by Pete Cyr »


Post Reply