Navy Seal
-
- Vectric Apprentice
- Posts: 70
- Joined: Mon Feb 06, 2017 7:07 pm
- Model of CNC Machine: Laguna IQ
- Location: Ladera Ranch CA
Navy Seal
Can anyone direct me where I can get a Navy Seal (Paid or free) I would like to cut it out 3d with the outside words United States Navy v carved. So I would like the outside rope border and the middle insignia to be 3d carved and the lettering to be v-carved.
Thank You
Ken
Thank You
Ken
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Navy Seal
Would the Navy Seal like to be cut? He or she might not complain---training and all that---but I expect they wouldn't be half pleased...
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Navy Seal
Have you tried a search on the forum Ken, sure there have been a few posts about Military plaques & crests some with links to where they can be found, not sure if what you are looking for has been mentioned though
-
- Vectric Apprentice
- Posts: 70
- Joined: Mon Feb 06, 2017 7:07 pm
- Model of CNC Machine: Laguna IQ
- Location: Ladera Ranch CA
Re: Navy Seal
I saw the one and Design and Make but that is not the Seal I am looking for. I will have to keep looking
-
- Vectric Craftsman
- Posts: 240
- Joined: Sun May 15, 2011 4:19 pm
- Model of CNC Machine: Camaster Stinger II
Re: Navy Seal
Do you have a picture of the one you are looking for?
-
- Vectric Craftsman
- Posts: 142
- Joined: Tue Jan 24, 2006 11:57 am
- Model of CNC Machine: ShopBot PRS Alpha
- Location: Imperial, PA USA
Re: Navy Seal
Here are the vectors for everything that you will need outside of the 3D relief. That you will have to buy from the Design and Make site.
Bill
Bill
- Attachments
-
- Navy Seal Vectors.eps
- (152.46 KiB) Downloaded 287 times
-
- Vectric Craftsman
- Posts: 170
- Joined: Sun Jul 28, 2013 9:09 pm
- Model of CNC Machine: Shopbot Desktop
Re: Navy Seal
Another potential source cncmilitaryemblems.com. If you can't find what your looking for send an email they could design one for you. I did that for a few USAF units I was looking for the end product looked great.
-
- Vectric Apprentice
- Posts: 70
- Joined: Mon Feb 06, 2017 7:07 pm
- Model of CNC Machine: Laguna IQ
- Location: Ladera Ranch CA
Re: Navy Seal
this is the logo i am looking for
https://www.alsarmynavy.com/prodimages/ ... l.jpg?vm=r
didn't see this one on Design and Make
Ken
https://www.alsarmynavy.com/prodimages/ ... l.jpg?vm=r
didn't see this one on Design and Make
Ken
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Navy Seal
I looked at those files available on Deisgn & Make and they all sort of look like the US Navy emblem but not quite. I expect the reason is a matter of licensing: http://www.navy.mil/trademarks/licensing.html
-
- Vectric Craftsman
- Posts: 142
- Joined: Tue Jan 24, 2006 11:57 am
- Model of CNC Machine: ShopBot PRS Alpha
- Location: Imperial, PA USA
Re: Navy Seal
Well, while I was in the Navy this is what it was.
https://commons.wikimedia.org/wiki/File ... e_Navy.svg
https://commons.wikimedia.org/wiki/File ... e_Navy.svg
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Navy Seal
You could use the design and make file then add your own text
This is the patch I use on my hats
DaleYou will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale