New guy to wrapping.....just a couple of questions.....before my head blows up.
1) Is there a way to have the carved image reflect the image as shown in the *.crv file?
In v-carve wrapping, the image that is carved is the mirror image of the *.crv file.
The setup used is to wrap X around Y with the center as the XY origin and top surface as Z origin. It is a Simple Wrap.
If the cylindar axis (Bottom) is specified for Z0, the machine writes in space above the cylindar.
2) The speed for the rotation of the A-Axis is VERY VERY high. How is it slowed down?
With the speeds showing on the machine computer for X and Y at 16%," A" shows 32,000.
Using a Cammaster stinger.