More of my project

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
Makingtoothpicks
Vectric Wizard
Posts: 520
Joined: Tue Jul 23, 2013 8:46 pm
Model of CNC Machine: Cncrouterparts CPR2448
Location: Burien, Wa
Contact:

More of my project

Post by Makingtoothpicks »

I have made some changes to the way I am making the 32 Counties of Ireland project.
I was using wax and then painting and letting over paint happen. Let it dry then sand. I now
have something that looks like I will be able to avoid sanding. I have started to use liquid
acrylic. Some small plastic bottles that have very small tip 3mm , 5mm , 7mm. I am using
the 7mm. Works almost to well. I have made a couple of mistakes that will need some sanding
on one tile. I moved it before dry, Lesson learned . Here are some pictures of part done pieces.
I need to perfect working with liquid acrylic

Don
Attachments
Donegal.jpg
Amagh.jpg

ricphoto
Posts: 28
Joined: Thu Feb 08, 2018 3:58 am
Model of CNC Machine: Axiom A8 Pro+
Location: PacNW 98367
Contact:

Re: More of my project

Post by ricphoto »

That gives an interesting look...are you going to leave it proud where/when you don't have to sand?

Link to the paints? (please ;-)

Thanks

User avatar
Makingtoothpicks
Vectric Wizard
Posts: 520
Joined: Tue Jul 23, 2013 8:46 pm
Model of CNC Machine: Cncrouterparts CPR2448
Location: Burien, Wa
Contact:

Re: More of my project

Post by Makingtoothpicks »


ricphoto
Posts: 28
Joined: Thu Feb 08, 2018 3:58 am
Model of CNC Machine: Axiom A8 Pro+
Location: PacNW 98367
Contact:

Re: More of my project

Post by ricphoto »

Makingtoothpicks wrote:Golden hiflow acrylic https://www.goldenpaints.com/products/colors/fluid

Don

Thank you Sir...

(Ric in Port Orchard)

Post Reply