nice to know you can bake with these too ;-p

An area to upload images of pieces cut using VCarve Pro
Post Reply
ricphoto
Posts: 28
Joined: Thu Feb 08, 2018 3:58 am
Model of CNC Machine: Axiom A8 Pro+
Location: PacNW 98367
Contact:

nice to know you can bake with these too ;-p

Post by ricphoto »

Shifting the learning curve over to HDPE and soft metals to explore what can be done with them...

Little did I know you could bake pretty good looking large 6" oreo cookies with the AR8Pro+and VCP Pro 9...

Grabbed a couple of scraps of 1/4" black and a 6x6 1/2" HDPE and using a dxf file from Buck4 (Thanks Buck ;-) here at the VCP forum...cut nice and quick with a 90 v-bit and cut out with an 1/8" o flute EM...bout 20 mins per outer layer and a matter of a minute or 2 for the cutout...still need to do a little clean-up and still working on the feeds and speeds but at least I won't go hungry ;-p
20180417_oreo-2.jpg
20180417_oreo.jpg

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: nice to know you can bake with these too ;-p

Post by mtylerfl »

Great job! Looks good enough to dunk and eat!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: nice to know you can bake with these too ;-p

Post by sharkcutup »

AWESOME!!!


Keep Those Chips a Flying!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

Post Reply