Mother’s Keepsake in Corian
-
- Vectric Wizard
- Posts: 415
- Joined: Wed Nov 19, 2008 7:28 pm
- Model of CNC Machine: EZ-Router
- Location: Bronkhorstspruit, South Africa
Mother’s Keepsake in Corian
This is a gift for a friend on her birthday. I decided to try Michael’s box in Corian.
Due to possible problems with hinges, I decided to make a fitted lid by pocketing a 5-mm recess on the bottom of the lid for a snug fit.
Copied from members that made a tray for the Paradise Box, I made small tray also out of Corian.
Due to possible problems with hinges, I decided to make a fitted lid by pocketing a 5-mm recess on the bottom of the lid for a snug fit.
Copied from members that made a tray for the Paradise Box, I made small tray also out of Corian.
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Mother’s Keepsake in Corian
Stunning and a more fitting use for Corian cannot be found. I sure it was well received. Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Mother’s Keepsake in Corian
What a great source of inspiration in this place.
So many AWESOME ideas
That box in Corian is AWESOME
So many AWESOME ideas
That box in Corian is AWESOME
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Posts: 47
- Joined: Tue Mar 10, 2015 11:54 pm
- Model of CNC Machine: Probiotix meteor 26x50
- Location: Glenns Ferry, idaho
Re: Mother’s Keepsake in Corian
Great project will make someone’s day keep on caving
Glenn
Glenn
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Mother’s Keepsake in Corian
I really like the way it came out, just beautiful. How did you stain/color it and with what? I have some black corian I need to do something with. Didn't want to just dump some contrasting paint in the carvings.
-
- Vectric Wizard
- Posts: 415
- Joined: Wed Nov 19, 2008 7:28 pm
- Model of CNC Machine: EZ-Router
- Location: Bronkhorstspruit, South Africa
Re: Mother’s Keepsake in Corian
Thank you for the kind words. But the real compliment must go to Michael who gave us all these beautiful projects.
The colour is simply black paint from a rattle can. The advantage of Corian is that there is no bleeding and the excess is easily removed by lacquer thinners
The colour is simply black paint from a rattle can. The advantage of Corian is that there is no bleeding and the excess is easily removed by lacquer thinners
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Mother’s Keepsake in Corian
Excellent. I have plenty of those. I might give it a try with one of the projects on black corian using a gold paint for accent color. Thanks.
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Re: Mother’s Keepsake in Corian
Beautiful Keepsake box, your mother is going to love it.
Thank You
Doug
Doug
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Mother’s Keepsake in Corian
Excellent work.
Another way to remove excess paint with corian is to paint the whole thing with color of choice then scrape off the excess with a credit card type card.
This removes most paint where its not wanted but of course anything engraved remains painted.
When dry, simply use an orbital or mouse sander [light grit, 120 or so] to remove from all areas not engraved - I follow this up with a matte clear coat which really makes the whole thing pop.
Another way to remove excess paint with corian is to paint the whole thing with color of choice then scrape off the excess with a credit card type card.
This removes most paint where its not wanted but of course anything engraved remains painted.
When dry, simply use an orbital or mouse sander [light grit, 120 or so] to remove from all areas not engraved - I follow this up with a matte clear coat which really makes the whole thing pop.
Doug
-
- Vectric Wizard
- Posts: 415
- Joined: Wed Nov 19, 2008 7:28 pm
- Model of CNC Machine: EZ-Router
- Location: Bronkhorstspruit, South Africa
Re: Mother’s Keepsake in Corian
Thanks Doug,Xxray wrote:Another way to remove excess paint with corian is to paint the whole thing with color of choice then scrape off the excess with a credit card type card.
What a brilliant idea I never considered that. I will try that next time. To be honest if one over-spray, removing the excess paint with thinners can create quite a mess.
Joz
- krugshouse
- Vectric Apprentice
- Posts: 52
- Joined: Sat Mar 03, 2012 11:37 pm
- Model of CNC Machine: Blackfoot v4.2, VCP 8, Mach 3
- Location: New Jersey
Re: Mother’s Keepsake in Corian
I have worked with Corian before, best way to get rid of over spay I found was to use 1200 wet/dry sand paper. I just run water over it in the sink while I sand . if you talk to kitchen guys they will tell you its the best way to remove scratches and bring back the shine.
Have a safe machining day
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Mother’s Keepsake in Corian
Man, I love that box the way you did it in the Corian and the paint-fill contrast! Beautiful, beautiful!
Great idea to add the shelf insert, too.
Great idea to add the shelf insert, too.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Mother’s Keepsake in Corian
I totally agree with you Michael, this is a very fine use for Corian. Very well done Jozua.
When I used it to make the Lady in the Woods carving that you saw at the McGrews Aspire Camp two years ago, I used dark gel stain, then wiped the surface with a little paint thinner on a folded paper towel, lightly wiping the surface until the surface was clean again. You get sharp edges that way, and the original slick finish on the Corian is not harmed at all. It also works with paint, but in both cases it uses a lot of paper towels. The folded paper should be lightly dampened and turned often. With practice you will get a feel for just how damp is best.
CarveOne
When I used it to make the Lady in the Woods carving that you saw at the McGrews Aspire Camp two years ago, I used dark gel stain, then wiped the surface with a little paint thinner on a folded paper towel, lightly wiping the surface until the surface was clean again. You get sharp edges that way, and the original slick finish on the Corian is not harmed at all. It also works with paint, but in both cases it uses a lot of paper towels. The folded paper should be lightly dampened and turned often. With practice you will get a feel for just how damp is best.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 415
- Joined: Wed Nov 19, 2008 7:28 pm
- Model of CNC Machine: EZ-Router
- Location: Bronkhorstspruit, South Africa
Re: Mother’s Keepsake in Corian
WOW!! Thank you for your kind compliments gentlemen. I am totally prepared to listen to the “Masters of the Trade”.
I have dark gel stain but was not sure that it will work Corian, I only use it for wood products. Thank you this is good to know. This will almost force me to make another one just to practice the new paint techniques.
Joz
I have dark gel stain but was not sure that it will work Corian, I only use it for wood products. Thank you this is good to know. This will almost force me to make another one just to practice the new paint techniques.
Joz
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Mother’s Keepsake in Corian
Jozua,
Here is a photo link to the carving I mentioned. You can see the fine details that are possible. Where cleaning did not bring out all of the little points in the details it is a simple matter to use fine sandpaper to lightly (and selectively) sand the points enough to make them white so they stand out. Do this after the gel stain or paint has dried, and blow off the dust. I used a final light overcoat of clear polyurethane afterwards to seal the gel stain.
http://forum.vectric.com/download/file. ... &mode=view
CarveOne
Here is a photo link to the carving I mentioned. You can see the fine details that are possible. Where cleaning did not bring out all of the little points in the details it is a simple matter to use fine sandpaper to lightly (and selectively) sand the points enough to make them white so they stand out. Do this after the gel stain or paint has dried, and blow off the dust. I used a final light overcoat of clear polyurethane afterwards to seal the gel stain.
http://forum.vectric.com/download/file. ... &mode=view
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com