Projekt Stargate alias "Aquagate08"

The Gallery is for posting photographs and images of work machined using Cut2D
Post Reply
User avatar
BBMMP
Posts: 4
Joined: Mon Jun 16, 2008 3:20 pm
Location: Austria / Vienna
Contact:

Projekt Stargate alias "Aquagate08"

Post by BBMMP »

Hi,

i have 2007 a idea, i have forgot , and found my old dxf from Stargate , but many are wrong, and not usable for Cut2D and CNC

it's not yet ready for Cutting, i have today over 12hour invested, and i hope it's look like a little as the "original" Gate...

the Prototyp cutting in wood, when it's ok i mill << ?? it from POM or similar plastic ...for Aquarium...

to be continued .. with picture and my German thread


thx for your notice

here the german Thread : http://www.bbmmp.net/forum_08/viewtopic.php?f=10&t=132

when links are not permitted please kill the link thx...


Richard
Attachments
My Stargate for Aqua :)
My Stargate for Aqua :)
Last edited by BBMMP on Fri Jun 20, 2008 4:41 pm, edited 1 time in total.
Aufgeben gibts nicht .....

User avatar
BBMMP
Posts: 4
Joined: Mon Jun 16, 2008 3:20 pm
Location: Austria / Vienna
Contact:

Aquagate by BBMMP

Post by BBMMP »

Hi,


20 hour later not a 1:1 copy but it looks like a little the Original.


i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....


look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert ;) , that i have no Copyright Problem with other Gate holder...

to be continued with the foot for the Gate....

Dimension are 240x240x20mm from the Gate...


Regards from Austria
Richard
Attachments
my second final Image , the Final following next Time ...
my second final Image , the Final following next Time ...
Aufgeben gibts nicht .....

User avatar
RoutnAbout
Vectric Wizard
Posts: 2085
Joined: Mon Sep 19, 2005 11:09 pm
Model of CNC Machine: 24x18 Desktop
Location: North Manchester, Indiana

Re: Aquagate by BBMMP

Post by RoutnAbout »

BBMMP wrote:...look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert ;) , that i have no Copyright Problem with other Gate holder...
Regards from Austria
Richard
Looks good Richard. Can't wait to see the final project.
Roll of Honor <-- Never Forget
________
Don

User avatar
metalworkz
Vectric Wizard
Posts: 2463
Joined: Mon Mar 31, 2008 3:26 am
Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
Location: Modesto, California 95358 USA

Post by metalworkz »

Hi Richard.
It looks very good so far! After taking a closer look at the image I can see how this would take a long time to prep. I am anxious to see the final part also.
Best regards,
Wes
wes.spence@comcast.net
Gingery Machines:
Lathe, Horiz. Mill, Shaper, Leaf Brake

User avatar
Len-Tikular
Vectric Wizard
Posts: 415
Joined: Sat Feb 13, 2010 11:27 am
Model of CNC Machine: Home made revision 3
Location: Denholm Scotland.

Re: Aquagate by BBMMP

Post by Len-Tikular »

BBMMP wrote:Hi,


20 hour later not a 1:1 copy but it looks like a little the Original.


i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....


look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert ;) , that i have no Copyright Problem with other Gate holder...

to be continued with the foot for the Gate....

Dimension are 240x240x20mm from the Gate...


Regards from Austria
Richard
Hi Richard this looks cool, did you finish it? would you care to share the dxf or crv?

Best regards

George
Len-Tikular (A glider pilots dream cloud)

Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s

Post Reply