Hi,
i have 2007 a idea, i have forgot , and found my old dxf from Stargate , but many are wrong, and not usable for Cut2D and CNC
it's not yet ready for Cutting, i have today over 12hour invested, and i hope it's look like a little as the "original" Gate...
the Prototyp cutting in wood, when it's ok i mill << ?? it from POM or similar plastic ...for Aquarium...
to be continued .. with picture and my German thread
thx for your notice
here the german Thread : http://www.bbmmp.net/forum_08/viewtopic.php?f=10&t=132
when links are not permitted please kill the link thx...
Richard
Projekt Stargate alias "Aquagate08"
Projekt Stargate alias "Aquagate08"
Last edited by BBMMP on Fri Jun 20, 2008 4:41 pm, edited 1 time in total.
Aufgeben gibts nicht .....
Aquagate by BBMMP
Hi,
20 hour later not a 1:1 copy but it looks like a little the Original.
i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....
look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert , that i have no Copyright Problem with other Gate holder...
to be continued with the foot for the Gate....
Dimension are 240x240x20mm from the Gate...
Regards from Austria
Richard
20 hour later not a 1:1 copy but it looks like a little the Original.
i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....
look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert , that i have no Copyright Problem with other Gate holder...
to be continued with the foot for the Gate....
Dimension are 240x240x20mm from the Gate...
Regards from Austria
Richard
Aufgeben gibts nicht .....
- RoutnAbout
- Vectric Wizard
- Posts: 2087
- Joined: Mon Sep 19, 2005 11:09 pm
- Model of CNC Machine: 24x18 Desktop
- Location: North Manchester, Indiana
Re: Aquagate by BBMMP
Looks good Richard. Can't wait to see the final project.BBMMP wrote:...look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert , that i have no Copyright Problem with other Gate holder...
Regards from Austria
Richard
- metalworkz
- Vectric Wizard
- Posts: 2463
- Joined: Mon Mar 31, 2008 3:26 am
- Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
- Location: Modesto, California 95358 USA
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Re: Aquagate by BBMMP
Hi Richard this looks cool, did you finish it? would you care to share the dxf or crv?BBMMP wrote:Hi,
20 hour later not a 1:1 copy but it looks like a little the Original.
i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....
look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert , that i have no Copyright Problem with other Gate holder...
to be continued with the foot for the Gate....
Dimension are 240x240x20mm from the Gate...
Regards from Austria
Richard
Best regards
George
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s