In researching and designing for an upcoming furniture making project I re-created these historical patterns for making moldings. All the patterns are "repeatable" so you can make them any length you want. You can download the files from my dropbox account if you wish.
https://www.dropbox.com/sh/xhn2wov3on9u ... TZ2ta?dl=0
Happy Carving!
Paul
VCarve Patterns for making carved trim moldings
-
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 21, 2009 8:22 pm
- Model of CNC Machine: ShopBot Buddy Standard
- Location: Marietta, GA.
Re: VCarve Patterns for making carved trim moldings
Thanks, Paul. These are very nice, just what I was looking for myself. Will wind up on a blanket chest project I have planned. Thanks again....joe
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: VCarve Patterns for making carved trim moldings
Thanks Paul for sharing. Great work, I know these will make their way into some of my projects.
John
Maker of Chips
Maker of Chips
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: VCarve Patterns for making carved trim moldings
Thanks for the files Paul!
I'm sure they'll be used:)
scott
I'm sure they'll be used:)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Craig Thompson
- Vectric Apprentice
- Posts: 57
- Joined: Sun Jun 12, 2016 5:11 pm
- Model of CNC Machine: Laguna Swift 4x4
- Location: Amherst Texas
Re: VCarve Patterns for making carved trim moldings
Thanks you Paul. I'm sure I can use them. Thanks again.
Craig
Craig
-
- Vectric Wizard
- Posts: 861
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: VCarve Patterns for making carved trim moldings
Thank you Paul, very nice work
Bob
Bob
-
- Vectric Craftsman
- Posts: 122
- Joined: Sat Sep 29, 2012 2:04 am
- Model of CNC Machine: CNC Router Parts PRO4848 w/LinuxCNC
- Location: Knoxville, TN
Re: VCarve Patterns for making carved trim moldings
Thanks for the files.
Re: VCarve Patterns for making carved trim moldings
Those look nice. Can you save them for use in V8.5?
I, as well as others I'm sure, are unable to use these, since they are saved in V9.
I would appreciate it, if it's possible.
I, as well as others I'm sure, are unable to use these, since they are saved in V9.
I would appreciate it, if it's possible.
Re: VCarve Patterns for making carved trim moldings
Samson,
I am not able to save as an "older" version but I have uploaded both a pdf and dxf of the vectors to that dropbox folder which you should be able to import into your software. Hope this helps. If that doesn't work let me know and we can try something else.
Paul
I am not able to save as an "older" version but I have uploaded both a pdf and dxf of the vectors to that dropbox folder which you should be able to import into your software. Hope this helps. If that doesn't work let me know and we can try something else.
Paul